Gord XS GU10 Square Spotlight - Black

The Gord XS is a compact square LED spotlight built around a single GU10 lamp holder, taking a PAR16 LED bulb up to a maximum of 10W on a 220-240V AC supply. Its small 80 by 80mm square body and 115mm depth give a tidy, boxy profile that reads as a modern surface spotlight, the format US buyers tend to call a directional ceiling spot. With a GU10 fitting you choose the bulb to set the look, so beam spread, output and colour temperature all follow the lamp you pair with it rather than being fixed into the fitting.

The Gord XS works well wherever a focused pool of light is needed indoors, picking out a kitchen worktop, a reading chair, artwork on a wall or shelving in a hallway. Because it carries one lamp and points light in a single direction, it is best read as an accent or task spot rather than a source of even room fill, so position it to graze a surface or wash a feature rather than to light a whole space on its own. Several units spaced along a run let you build a line of accents over a counter or down a corridor, and the adjustable head means you can angle the throw onto exactly what you want lit.

The body is aluminium alloy in a black finish, weighing 370g, with a square head that suits clean contemporary interiors. It is ceiling mounted and rated IP20, which makes it a dry indoor fitting only, so keep it clear of bathrooms, porches and any outdoor or damp location. No driver is needed as the GU10 lamp runs direct from mains voltage; dimming depends on the bulb you fit and a compatible dimmer. Wipe the housing with a soft dry cloth to keep the finish clean. The Gord XS sits within a wider Gord range of square spots in matching finishes for coordinated schemes.

Is a bulb included with the Gord XS?

No, the fitting takes a GU10 PAR16 LED lamp rated up to a maximum of 10W, which is supplied separately. This lets you choose the beam angle, brightness and colour temperature to suit the room, and makes the lamp easy to replace later.

Can the Gord XS be used outdoors or in a bathroom?

No, it is rated IP20, so it is suitable for dry indoor use only. Keep it clear of bathrooms, porches, carports and any garden or damp location, where a higher IP65 fitting would be required instead.

Can I adjust where the light points?

Yes, the head can be angled so you can direct the beam onto a worktop, a piece of artwork or a wall feature. This makes it well suited to accent and task lighting rather than general room fill.

How do I clean and maintain the Gord XS?

Switch off the power and let any fitted lamp cool, then wipe the aluminium alloy housing with a soft dry cloth. Avoid solvents or abrasive cleaners, which can mark the black finish over time.