Freida Organza Pendant Lampshade with Crystal Drops - White 50cm

The Freida is a 50cm diameter drum lampshade built from layered white organza fabric with cascading crystal drops suspended beneath the lower rim. The shade itself is a non-electric fitting designed to slip over a standard pendant bulb holder or table lamp base (sold separately), with the organza layers diffusing the light source into a soft, even glow across the 500mm diameter and 180mm height.

Designed for dining tables, bedroom pendants and living room statement fittings, the Freida pairs the softness of sheer fabric with the hard reflectivity of cut crystal. The organza layers are stitched into vertical pleats that run from top to bottom, creating a ribbed texture that catches light at different angles during the day and evening. The crystal drops beneath the shade are strung on fine metal wires, ending in slim hexagonal pendants that move gently in air circulation and reflect light from the bulb above.

The shade accepts bulbs up to 40W and works with ES (E27) or BC (B22) pendant fittings depending on the adapter ring supplied. The white organza finish suits both warm and cool colour palettes and blends into neutral interiors without dominating the room during daylight hours. At 0.64kg the shade is light enough to fit standard ceiling roses without additional support, though the crystal drops add visual weight when viewed from below.

Does this come with a bulb holder or cable?

No. The Freida is a shade-only fitting. It requires a separate pendant bulb holder, ceiling rose and cable set, or can be fitted to an existing table lamp base with a matching harp or spider fitting.

What bulb does it take?

The shade accepts bulbs up to 40W and works with standard ES (E27) or BC (B22) fittings depending on the adapter ring used. Most buyers pair this with a warm-white LED bulb between 4-6W and 2700K-3000K to avoid overheating the fabric.

How is the organza cleaned?

Dust the shade gently with a soft brush or dry microfibre cloth. The organza is delicate and should not be soaked or spot-cleaned with liquids. For the crystal drops, wipe with a barely-damp cloth and dry immediately to prevent water spots.

What fitting type does it use?

The shade uses a duplex ring fitting at the top, which is the standard UK pendant shade fitting. It sits on a pendant bulb holder with the ring supporting the shade around the neck of the bulb holder.