Description
This is a candle-shaped LED bulb with a B22 bayonet cap, the two-pin push and twist fitting that most British ceiling roses and older light fittings use. It draws 4.2W and gives 470 lumens, and the pack rates that as a replacement for a 40W filament candle. The finish is opal rather than clear, so the light leaves the bulb evenly spread instead of showing the diodes inside. Colour temperature is 4,000K, a cool white with no yellow in it: crisper than the 2,700K warm white most people know from older tungsten lamps, and closer to the light of a bright overcast day.
Cool white at this level suits rooms where you want to see clearly rather than settle in. Kitchens, home offices, hallways and utility spaces all take it well, and it works in a multi-arm chandelier or a pair of wall lights where several bulbs are on show at once. Because the shape is the traditional candle, it sits properly in small clip-on shades and in fittings where the bulb is meant to be seen. If a room already runs warm white elsewhere, keep this one to its own circuit: mixing the two in a single space reads as a mistake.
It dims, which is worth checking against the dimmer you already have. LED bulbs pull very little current, so a plate designed for filament lamps may not have enough load on it to run smoothly; where flicker appears at the bottom of the dial, a trailing edge LED dimmer usually settles it. The pack prints a 15 year lifespan, and the energy rating is E. Each box holds one bulb and the minimum order is 12, sold in multiples of 12, so it suits fitting out a whole house or keeping spares in the cupboard. We also list LED candle bulbs on the smaller B15 (SBC) cap in cool white 4000K and warm white 2700K.
Specification
| Fitting |
B22 bayonet cap (BC) |
| Shape |
Candle, opal |
| Technology |
LED |
| Wattage |
4.2W |
| Brightness |
470lm |
| Equivalent |
40W, as printed on the retail pack |
| Colour temperature |
4,000K cool white |
| Dimmable |
Yes |
| Energy rating |
E |
| Lifespan as printed |
15 years, as printed on the retail pack |
| Sold as |
Box of 1 bulb |
| Minimum order |
12, sold in multiples of 12 |
Frequently Asked
Will this fit my existing light?
It takes a B22 bayonet cap, the one you push in and twist a quarter turn. Pull your old bulb out and look at the base: two small pins on a smooth metal cap means B22, while a threaded cap means you need a screw fitting instead.
Can I run it on a dimmer switch?
Yes, the specification confirms it is dimmable. Older dimmers built for filament bulbs often need a minimum load that one 4.2W lamp will not reach, so if you see flicker or a buzz at low settings, a trailing edge LED dimmer is the usual fix.
How bright is 470 lumens in practice?
It is the working brightness of an old 40W filament candle, which the pack quotes as the replacement figure. In a multi-arm fitting with three or five of these, that adds up to a comfortable level of general light for a kitchen or hallway.
What does 4,000K cool white actually look like?
Clean and neutral, with none of the yellow cast of 2,700K warm white. It keeps whites looking white and makes task areas such as worktops and desks easier to read, though it feels less cosy in a sitting room or bedroom.
Is an IP rating given for this bulb?
No IP rating is printed on the retail pack and none appears in the manufacturer specification, so we state none. Treat it as an ordinary indoor bulb for dry, enclosed domestic fittings and nothing more demanding than that.
How many bulbs do I actually receive?
Each box contains a single bulb. The minimum order on this listing is 12, sold in multiples of 12, so a first order brings you twelve individually boxed bulbs rather than one carton of twelve.