Description
This is a round LED bulkhead light in a white finish, with a white opal polycarbonate diffuser over a galvanised steel and polycarbonate body. It measures 300mm across and 60mm deep, and weighs 1KG. The integrated LED draws 18W and gives 1800 to 2000 lumens at 100 to 111 lumens per watt, so there is no bulb to buy or change. A colour rendering of CRI above 80 keeps colours looking natural. Each fitting is set to 3000K, 4000K or 6500K when it is installed, so you choose a warm, neutral or cool white for the space. It carries an on-off microwave sensor that switches the light on when it detects movement and off again once the area is empty, and an emergency lighting function with a manual test.
Because it mounts on a ceiling or a wall, it is a practical choice for corridors, stairwells, kitchens and bathrooms, the busy everyday spaces where a light that looks after itself pays its way. Its IP44 rating means it is protected against splashing water, and its IK08 impact rating means it stands up well to knocks. It suits landlords, facilities managers and electricians fitting out communal hallways and stairs, and homeowners who want a hallway light that comes on as they walk in. It is rated for ambient temperatures from -20°C to 40°C.
The integrated LED has a rated life of 35,000 hours (L70), so it will give years of service before it needs attention. It is non-dimmable, so it goes on a standard switched circuit rather than a dimmer, with the sensor doing the everyday switching for you. It is powered from the mains (220-240V AC) and is installed by a qualified electrician, on either the ceiling or the wall. It comes with a 5-year warranty, and we think it is a sensible, low-fuss bulkhead for anywhere people come and go.
Specification
| Light Source |
Integrated LED |
| Wattage |
18W |
| Lumens |
1800-2000lm |
| Efficacy |
100-111lm/W |
| Colour Temperature |
3000K, 4000K & 6500K |
| Colour Rendering |
CRI>80 |
| IP Rating |
IP44 |
| Impact Rating |
IK08 |
| Dimming |
Non-Dimmable |
| Emergency |
Manual-Test |
| Sensor |
On-Off |
| Dimensions |
300 x 300 x 60mm |
| Material |
Galvanised Steel & PC |
| Diffuser |
PC |
| Finish |
White |
| Input Voltage |
220-240V AC |
| Electrical Class |
Class II |
| Rated Life |
35,000 hours (L70) |
| Mounting |
Ceiling or Wall |
| Ambient Temperature |
-20-40°C |
| Warranty |
5 years |
| Weight |
1KG |
Downloads
Specification Sheet
Installation Instructions
Frequently Asked
How much light does it give, and what colour is it?
It gives 1800 to 2000 lumens from an 18W integrated LED, and each fitting is set to 3000K, 4000K or 6500K when it is installed.
How big is the bulkhead?
It is round, 300mm across and 60mm deep, and weighs 1KG, so it sits neatly on either a ceiling or a wall.
Can I use it in a bathroom or kitchen?
Yes. It is rated IP44, which protects it against splashing water, so it suits bathrooms and kitchens as well as corridors and stairwells.
Is it dimmable?
No. It is non-dimmable, so it goes on a standard switched circuit rather than a dimmer, and the microwave sensor turns it on and off.
How does the sensor work?
Its on-off microwave sensor switches the light on when it detects movement and turns it off again once the area is empty.