Ellison 1 Light Bathroom Wall Light - Black with Brushed Nickel

The Ellison is a 346mm single-light bathroom wall light built around a vertical clear glass cylinder mounted on a black circular backplate, with a faceted brushed nickel cuff positioned mid-height on the glass. The cuff is machined with geometric cut facets that catch and reflect light from the exposed E27 filament bulb inside the glass tube. The black finish on the circular backplate and mounting band contrasts with the polished brushed nickel to create a two-tone effect.

Designed for bathroom vanity zones, powder rooms and hallways, the Ellison carries an IP44 rating for moisture resistance in bathroom environments. The 127mm width and 119mm projection suit installations above or alongside mirrors where wall space is limited, and the vertical glass tube sits close enough to the wall to avoid obstruction in narrow bathrooms. The fitting accepts any E27 bulb up to 40W (sold separately), allowing flexibility in light temperature and style — a clear filament LED suits the exposed glass, while a frosted bulb softens the light output for vanity use.

The faceted brushed nickel cuff serves as both a structural collar holding the glass cylinder and a decorative accent that picks up ambient light from adjacent fittings or windows. The black circular backplate measures approximately 120mm diameter and mounts flush to the wall on a standard UK lighting circuit. The contrast between the matt black metal and the brushed nickel gives the fitting a transitional character that pairs with both contemporary minimalist bathrooms and traditional schemes using black ironmongery.

Product Specification Sheet

Is this suitable for bathroom use?

Yes. The Ellison carries an IP44 rating, meaning it is protected against water splashes from any direction. It is suitable for zones 2 and 3 in UK bathroom electrical regulations (outside the immediate shower enclosure and bath area).

What bulb does it take?

The fitting takes a standard E27 (Edison screw) bulb up to 40W. Bulbs are sold separately. A clear filament LED in 4-6W and 2700K suits the exposed glass design, while a frosted bulb diffuses light more evenly for vanity mirror use.

Can it be installed in pairs?

Yes. The 127mm width allows two Ellison lights to be installed either side of a bathroom mirror with approximately 600-800mm spacing between centres, typical for vanity mirror lighting.

What is the projection from the wall?

The fitting projects 119mm from the wall surface, measured to the outer edge of the glass cylinder. This compact depth suits narrow bathrooms and hallways where larger projection fittings would obstruct movement.