Description
This dimmable LED wall light is a small integrated 2.7W fitting that sits recessed in the wall and gives a warm 3000K light. Because the LED is built in, there is no bulb to buy or change, and it is rated for 50,000 hours (L70). Colour rendering is above 90 (CRI>90), so wood, paint and fabric keep their true colours rather than looking flat. The body is aluminium and weighs just 0.1KG. It measures 40.7 by 40.7 millimetres and is 92.5 millimetres deep, and it fits a 45mm cut-out in the wall.
We see it as a small accent light for the rooms you walk through and the corners you want softly lit: a hallway, a kitchen, a living room or a home office. It is rated IP54, which means it is protected against dust and splashing water, so it can also go on a bathroom wall, though never inside a shower enclosure. Its IK04 impact rating gives it a measure of protection against light knocks. It suits a homeowner finishing a renovation just as well as a trade installer lighting several rooms in the same warm white.
It dims on the mains with either a leading edge or a trailing edge phase cut dimmer, so you can turn it down to a gentle glow in the evening. It runs on mains power at 220-240V AC, is a Class I fitting, and works in an ambient temperature from -10 to 40°C, so a cool, unheated hallway in winter is no trouble. It comes with a 5-year warranty. As with any mains fitting, it is installed by a qualified electrician.
Specification
| Light Source |
Integrated LED |
| Wattage |
2.7W |
| Lumens |
See Bezel Accessorieslm |
| Efficacy |
See Bezel Accessorieslm/W |
| Colour Temperature |
3000K |
| Colour Rendering |
CRI>90 |
| IP Rating |
IP54 |
| Impact Rating |
IK04 |
| Dimming |
Mains (Leading Edge/Trailing Edge) |
| Cut-Out |
45mm |
| Dimensions |
40.7 x 40.7 x 92.5mm |
| Material |
Aluminium |
| Input Voltage |
220-240V AC |
| Electrical Class |
Class I |
| Rated Life |
50,000 hours (L70) |
| Mounting |
Wall |
| Ambient Temperature |
-10-40°C |
| Warranty |
5 years |
| Weight |
0.1KG |
Downloads
Specification Sheet
Installation Instructions
Frequently Asked
Can this LED wall light be dimmed?
Yes. It works with both leading edge and trailing edge phase cut mains dimmers, so you can turn the 2.7W LED down for a softer evening light.
Can I put this wall light in a bathroom?
Yes, away from the shower. It is rated IP54, protected against dust and splashing water, so it suits a bathroom wall but never the inside of a shower enclosure.
What size hole does it need in the wall?
It fits a 45mm cut-out in the wall, and the body measures 40.7 by 40.7 millimetres and is 92.5 millimetres deep.
What colour is the light?
It gives a warm white light at 3000K with colour rendering above 90 (CRI>90), so skin tones, timber and furnishings look natural.
Does it take a bulb?
No. The LED is integrated, so there is no bulb to change, and it is rated for 50,000 hours (L70) of use.