Description
This is a concrete floor expansion bolt kit, the fixing that holds a bollard down to a solid base. It fits the Hydra Bollard. Each expansion bolt is a straightforward piece of hardware: a threaded bolt runs through a slotted sleeve, with a hex nut and a flat washer at the top and a tapered end at the foot. As the nut is tightened, the tapered end is drawn up into the sleeve, which spreads outwards and grips the sides of the hole. The kit measures 100mm long and 10mm by 10mm across, and weighs 0.3KG, so it is light and easy to carry along with the bollard.
It is made for a floor fixing into concrete, the firm base a bollard needs to stand straight and steady. We think it suits electricians, contractors and site teams fitting the bollard who would rather have the correct fixings in hand than hunt for bolts of the right size on the day. Ordering the kit with the bollard keeps everything for the job together, so the fixing down can be done in one visit rather than waiting on hardware. It is equally useful as a spare set to keep in the van for future installs.
There is nothing to wire and nothing to power here: this is a purely mechanical fixing with no electrics of its own, and it needs no other parts to do its job. Keep the threads clean and free of dust so the nuts run on smoothly, and store any unused bolts somewhere dry until they are needed. Once the bollard is fixed, the bolts sit out of the way at its base and need no attention. Any lighting connected to the mains is installed by a qualified electrician, and the kit comes with a 5-year warranty.
Specification
| Dimensions |
10 x 10 x 100mm |
| Mounting |
Floor |
| Warranty |
5 years |
| Weight |
0.3KG |
Downloads
Specification Sheet
Installation Instructions
Frequently Asked
What does this bolt kit fit?
It is made to fix the bollard it is designed for down to a concrete floor, holding it upright on a solid base.
How big is the expansion bolt kit?
It measures 100mm long and 10mm by 10mm across, and the whole kit weighs 0.3KG, so it is light to carry.
How does an expansion bolt hold in concrete?
Tightening the hex nut draws the tapered end up into the slotted sleeve, which spreads outwards and grips the sides of the hole.
Does the bolt kit need any power or wiring?
No. It is a purely mechanical fixing with no electrics of its own, and it needs no other parts to work.
What kind of floor is the kit for?
It is for a floor fixing into concrete, giving the bollard a firm, solid base to stand straight and steady on.