Description
The Bord One is a compact round LED spotlight built around a single GU10 lamp holder, rated for a lamp up to 10W running from a 220 to 240V AC mains supply. At just Ø80 by 85mm it sits close to the ceiling and throws a tight, directional cone rather than a broad wash, which is what gives a spotlight its precise pool of light. North American buyers will know this GU10 fitting as a standard spot or accent light, and here it keeps the same job in a small white housing. The PAR16 lamp format keeps the beam contained and easy to aim.
The Bord One suits accent and task spots where a single point of light is wanted: over a worktop, picking out a shelf, a piece of artwork or an alcove, or as part of a row of fittings across a kitchen or hallway. Because it is a focused spotlight rather than ambient room lighting, think of it in terms of throw and the object it lands on rather than a floor area. Several units spaced along a ceiling line give even accent coverage. With an IP20 rating it is for dry indoor positions only, so keep it clear of bathrooms, porches and any outdoor or damp location.
The body is aluminium alloy in a white finish, a round form that reads cleanly against a flat ceiling. It is ceiling mounted and surface fixed, taking a GU10 lamp that the installer specifies separately, so the colour temperature and exact wattage are chosen at the lamp. Dimming depends entirely on the GU10 lamp fitted. The fitting weighs 170g. The Bord One sits within the wider Bord range of matching spotlights.
Specification
| Power |
max 10W |
| Voltage |
220-240 AC |
| IP rating |
IP20 |
| Mounting |
Ceiling Mounted |
| Cap / base |
GU10 |
| Light source |
PAR16 |
| Shape |
Round |
| Dimensions |
Ø80 × 85 mm |
| Weight |
170 g |
| Material |
Aluminium Alloy |
| Finish |
White |
Downloads
Frequently Asked
Can the Bord One be used outdoors or in a bathroom?
No. It carries an IP20 rating, which means it is suitable for dry indoor locations only. Keep it out of bathrooms, porches and any outdoor or damp area where moisture could reach it.
Is a GU10 bulb included, and can it be dimmed?
The fitting takes a standard GU10 lamp, which is specified separately so you can choose the wattage and colour temperature. Whether it dims depends on the GU10 lamp you fit, as the dimming is handled at the lamp.
What beam does this spotlight give?
It uses a PAR16 GU10 lamp, which produces a focused directional cone rather than a broad spread. This makes it well suited to accent work such as lighting a shelf, picture or worktop, with the exact beam angle set by the lamp chosen.
How do I clean the Bord One?
Switch it off and let the lamp cool, then wipe the white aluminium housing with a soft, dry or slightly damp cloth. Avoid abrasive cleaners so the finish stays unmarked.