Description
The Blingo is a recessed LED panel light built into a slim 1195 x 295 mm rectangular frame just 27 mm deep. It draws 34W from a 220-240V AC mains supply and delivers 4080 lumens at an efficiency of 120 lm/W, giving a bright, even wash across its face. The fixed 4000K cool white tone holds a neutral daylight character that keeps spaces feeling clean and alert. With a wide 90 deg beam the output spreads broadly rather than spotlighting, so the light reads as a single luminous surface. North American specifiers will recognise this 1200 x 300 format as a 1x4 troffer panel, the standard one-by-four grid size for dropped ceilings.
Running on mains power, the Blingo suits offices, meeting rooms, reception areas, classrooms and retail floors where consistent overhead light matters. At general lighting levels its 4080 lumens cover around 14 m², which makes it a sensible single-fitting choice for a modest room or a building block in a larger gridded layout. It is designed for indoor use only and should be kept clear of bathrooms, damp areas and any outdoor position. The recessed format needs adequate clearance in the ceiling void above the grid, so allow for the panel body and the wiring behind it when planning a suspended or plasterboard ceiling.
The Blingo has a steel body finished in white, with the LED array sealed behind a diffusing face for soft, glare-controlled output. It carries an IP20 rating, confirming its dry indoor remit, and a rated lifespan of 50,000 hours. A 4000K cool white driver is included in the box, so the panel runs straight from mains with no separate transformer to specify, though note this model is not dimmable. It recesses into a standard 1x4 grid or a cut aperture and weighs 1.63 kg. The Blingo range also offers other sizes and colour temperatures to match across a single project.
Specification
| Power |
34W |
| Voltage |
220-240 AC |
| Luminous flux |
4080 lm |
| Efficiency |
120 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
90° |
| IP rating |
IP20 |
| Dimmable |
No |
| Driver included |
Yes |
| Mounting |
Recessed Mount In The Ceiling |
| Lifespan |
50,000 hours |
| Shape |
Rectangular |
| Dimensions |
1195 × 295 × 27 mm |
| Weight |
1.63 kg |
| Material |
Steel |
| Finish |
White |
Downloads
Frequently Asked
Does this panel fit a standard suspended ceiling grid?
Yes. At a nominal 1200 x 300 mm, the Blingo is a 1x4 panel that drops into a standard suspended or drop-ceiling grid module. For a plasterboard ceiling you can cut a matching aperture and recess it flush, allowing clearance in the void above for the panel body and wiring.
How many lumens does it give and what room size does it suit?
The panel produces 4080 lumens at 4000K cool white. At general lighting levels that covers around 14 m², so it works well as the single fitting for a small office or treatment room, or repeated across a grid for larger floors.
Is this panel dimmable?
No, this model is not dimmable. It is supplied with its driver included and runs directly from a 220-240V AC mains supply, switching simply on and off.
How do I clean the panel face?
Wipe the diffuser gently with a soft, dry or barely damp lint-free cloth once the panel is switched off and cool. Avoid solvents and abrasive pads, which can mark the diffusing surface and reduce light output over time.