Free Delivery on all orders over £99*

6AX 2-Way 1-10V Dimmer Module - Rotary Control

£999
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge CU110V is a 6AX 2-way dimmer module designed for LED drivers and high-frequency ballasts that use a 1-10V DC control input. The module combines a rotary dial for brightness adjustment with a push on/off switch, giving separate control over dimming level and mains power. The brightness control circuit and the mains switching circuit are electrically isolated from each other.

Intended for installation in multi-gang modular systems, the module ships with a curved edge grid adaptor kit that allows it to be fitted into Knightsbridge's grid system or used with unpopulated dimmer plates. The module fits into a standard 25mm back box behind the grid frame. The 2-way configuration allows the dimmer to be controlled from two separate switch positions, useful in corridors, staircases, and rooms with multiple entry points.

The module is rated at 6AX on 230V mains, handling up to 1,380W of switched load. However, it must only be paired with dimmable ballasts or LED drivers that provide a 1-10V DC control input — it cannot drive LED lamps directly. Before installation, check that the in-rush current of connected LED lamps or drivers does not exceed 6A, and that the control signal side of the ballast or driver does not exceed 50mA. Fit in-rush current limiters where necessary to prevent overload during switch-on.

Specification
Height 59.8mm
Width 23mm
Depth 40.5mm
Projection 18°
Recessed Depth 22.5mm
Construction PA
Finish Black
IP Rating IP20
Primary Voltage 230V 50Hz
Downloads

Product Specification Sheet

Frequently Asked

What is a 1-10V dimmer and how does it differ from a standard dimmer?

A 1-10V dimmer sends a low-voltage control signal (1-10V DC) to a compatible LED driver or ballast, which then adjusts the brightness of the connected lamps. Standard dimmers vary the mains voltage directly to the lamp. This module requires LED drivers or ballasts with a 1-10V control input — it cannot be used with standard dimmable LED lamps that expect phase-cut dimming.

What does 2-way mean?

2-way means the dimmer can be controlled from two separate switch positions, allowing control from either end of a corridor, staircase, or room with multiple entry points. This requires appropriate wiring during installation.

What is the maximum load?

The module is rated at 6AX on 230V, which equates to 1,380W of switched load. However, you must also check that the in-rush current of your LED lamps or drivers does not exceed 6A, and that the control signal side of your ballast or driver does not exceed 50mA. Use in-rush current limiters where necessary.

What is included in the box?

The module ships with a curved edge grid adaptor kit, allowing it to be installed in Knightsbridge's modular grid system or used with unpopulated dimmer plates. The module itself, the grid adaptor components, and mounting hardware are included.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Installation

Fits standard UK back boxes

Designed to fit standard UK back boxes for a straightforward swap of your existing fittings.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge CU110V is a 6AX 2-way dimmer module designed for LED drivers and high-frequency ballasts that use a 1-10V DC control input. The module combines a rotary dial for brightness adjustment with a push on/off switch, giving separate control over dimming level and mains power. The brightness control circuit and the mains switching circuit are electrically isolated from each other.

    Intended for installation in multi-gang modular systems, the module ships with a curved edge grid adaptor kit that allows it to be fitted into Knightsbridge's grid system or used with unpopulated dimmer plates. The module fits into a standard 25mm back box behind the grid frame. The 2-way configuration allows the dimmer to be controlled from two separate switch positions, useful in corridors, staircases, and rooms with multiple entry points.

    The module is rated at 6AX on 230V mains, handling up to 1,380W of switched load. However, it must only be paired with dimmable ballasts or LED drivers that provide a 1-10V DC control input — it cannot drive LED lamps directly. Before installation, check that the in-rush current of connected LED lamps or drivers does not exceed 6A, and that the control signal side of the ballast or driver does not exceed 50mA. Fit in-rush current limiters where necessary to prevent overload during switch-on.

    Specification
    Height 59.8mm
    Width 23mm
    Depth 40.5mm
    Projection 18°
    Recessed Depth 22.5mm
    Construction PA
    Finish Black
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Downloads

    Product Specification Sheet

    Frequently Asked

    What is a 1-10V dimmer and how does it differ from a standard dimmer?

    A 1-10V dimmer sends a low-voltage control signal (1-10V DC) to a compatible LED driver or ballast, which then adjusts the brightness of the connected lamps. Standard dimmers vary the mains voltage directly to the lamp. This module requires LED drivers or ballasts with a 1-10V control input — it cannot be used with standard dimmable LED lamps that expect phase-cut dimming.

    What does 2-way mean?

    2-way means the dimmer can be controlled from two separate switch positions, allowing control from either end of a corridor, staircase, or room with multiple entry points. This requires appropriate wiring during installation.

    What is the maximum load?

    The module is rated at 6AX on 230V, which equates to 1,380W of switched load. However, you must also check that the in-rush current of your LED lamps or drivers does not exceed 6A, and that the control signal side of your ballast or driver does not exceed 50mA. Use in-rush current limiters where necessary.

    What is included in the box?

    The module ships with a curved edge grid adaptor kit, allowing it to be installed in Knightsbridge's modular grid system or used with unpopulated dimmer plates. The module itself, the grid adaptor components, and mounting hardware are included.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.