Free Delivery on all orders over £99*

3 Gang 2-Way Intelligent Dimmer 5-400W (5-150W LED) - White Round Edge

£4699
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge 3-gang 2-way intelligent dimmer handles loads from 5-400W for incandescent or halogen lamps, or 5-150W for dimmable LED lamps, across three independent rotary controls on a single white round-edge plate. Each gang can be switched between trailing-edge and leading-edge dimming modes using the front-facing controls, allowing the dimmer to adapt to different lamp technologies without removing the faceplate.

Designed for living rooms, bedrooms and hallways with multiple lighting circuits controlled from two positions, the 2-way function allows the dimmer to be paired with a second dimmer or switch elsewhere in the room for multi-point control. Each rotary knob operates on a push-on/push-off mechanism, turning the circuit on or off with a press and adjusting brightness with a turn. All setup functions including trim adjustment, mode switching and factory reset are accessible from the front knobs, so reconfiguring the dimmer for different lamp types does not require rewiring or dismounting the plate.

The 7mm rounded-edge plate is moulded from thermoset resin with an anti-microbial additive, giving the white finish resistance to surface bacteria growth in high-touch environments. The dimmer fits a standard 25mm minimum mounting box depth and projects 25.5mm from the wall once installed. The plate measures 86mm high by 146mm wide, covering a standard 3-gang aperture. The IP20 rating restricts the dimmer to dry indoor locations only.

Each gang must be used with dimmable lamps only — non-dimmable LEDs or CFLs will flicker or fail. For reliable operation, all lamps on a single gang should be the same brand, the same wattage and the same technology (do not mix LED with incandescent, or mix different LED wattages on the same circuit).

Specification
Height 86mm
Width 146mm
Depth 43.5mm
Projection 25.5°
Recessed Depth 18.3mm
Min. Mounting Box Depth 25mm
Construction Thermoset resin
Finish White
IP Rating IP20
Primary Voltage 230V 50Hz
Downloads

Product Specification Sheet

Frequently Asked

What's the difference between trailing-edge and leading-edge mode?

Trailing-edge mode suits most dimmable LED and low-voltage halogen lamps and produces smoother dimming with less flicker. Leading-edge mode suits older incandescent and mains-voltage halogen lamps. The dimmer can be switched between modes from the front knob to match the lamp technology you're using.

Can I use this with non-dimmable LED bulbs?

No. The dimmer requires dimmable lamps on all three gangs. Non-dimmable LEDs or CFLs will flicker, buzz or fail when connected to a dimmer circuit. Check the lamp packaging for "dimmable" or a dimmer-compatible symbol before use.

What does 2-way mean?

2-way allows the lighting circuit to be controlled from two positions in the room — for example, a dimmer at the door and a second dimmer or switch at the opposite end of a hallway. This requires compatible 2-way wiring between the two control points.

Why must all lamps on one gang be identical?

Mixing different lamp brands, wattages or technologies on a single dimmer gang causes uneven dimming, flicker and premature lamp failure because each lamp type responds differently to the dimming curve. For stable operation, keep all lamps on one gang identical.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Installation

Fits standard UK back boxes

Designed to fit standard UK back boxes for a straightforward swap of your existing fittings.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge 3-gang 2-way intelligent dimmer handles loads from 5-400W for incandescent or halogen lamps, or 5-150W for dimmable LED lamps, across three independent rotary controls on a single white round-edge plate. Each gang can be switched between trailing-edge and leading-edge dimming modes using the front-facing controls, allowing the dimmer to adapt to different lamp technologies without removing the faceplate.

    Designed for living rooms, bedrooms and hallways with multiple lighting circuits controlled from two positions, the 2-way function allows the dimmer to be paired with a second dimmer or switch elsewhere in the room for multi-point control. Each rotary knob operates on a push-on/push-off mechanism, turning the circuit on or off with a press and adjusting brightness with a turn. All setup functions including trim adjustment, mode switching and factory reset are accessible from the front knobs, so reconfiguring the dimmer for different lamp types does not require rewiring or dismounting the plate.

    The 7mm rounded-edge plate is moulded from thermoset resin with an anti-microbial additive, giving the white finish resistance to surface bacteria growth in high-touch environments. The dimmer fits a standard 25mm minimum mounting box depth and projects 25.5mm from the wall once installed. The plate measures 86mm high by 146mm wide, covering a standard 3-gang aperture. The IP20 rating restricts the dimmer to dry indoor locations only.

    Each gang must be used with dimmable lamps only — non-dimmable LEDs or CFLs will flicker or fail. For reliable operation, all lamps on a single gang should be the same brand, the same wattage and the same technology (do not mix LED with incandescent, or mix different LED wattages on the same circuit).

    Specification
    Height 86mm
    Width 146mm
    Depth 43.5mm
    Projection 25.5°
    Recessed Depth 18.3mm
    Min. Mounting Box Depth 25mm
    Construction Thermoset resin
    Finish White
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Downloads

    Product Specification Sheet

    Frequently Asked

    What's the difference between trailing-edge and leading-edge mode?

    Trailing-edge mode suits most dimmable LED and low-voltage halogen lamps and produces smoother dimming with less flicker. Leading-edge mode suits older incandescent and mains-voltage halogen lamps. The dimmer can be switched between modes from the front knob to match the lamp technology you're using.

    Can I use this with non-dimmable LED bulbs?

    No. The dimmer requires dimmable lamps on all three gangs. Non-dimmable LEDs or CFLs will flicker, buzz or fail when connected to a dimmer circuit. Check the lamp packaging for "dimmable" or a dimmer-compatible symbol before use.

    What does 2-way mean?

    2-way allows the lighting circuit to be controlled from two positions in the room — for example, a dimmer at the door and a second dimmer or switch at the opposite end of a hallway. This requires compatible 2-way wiring between the two control points.

    Why must all lamps on one gang be identical?

    Mixing different lamp brands, wattages or technologies on a single dimmer gang causes uneven dimming, flicker and premature lamp failure because each lamp type responds differently to the dimming curve. For stable operation, keep all lamps on one gang identical.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.