Zuma 6 Light Chandelier - Satin Black & Gold

The Zuma is a 450mm-diameter chandelier built around a faceted satin black metal shade with six E27 bulb fittings inside. Below the shade, hundreds of fine gold-tone metal chains hang in a tiered fringe, creating a curtain effect that softens the geometric structure above and catches light as it moves. The chandelier suspends on steel cables from a matching satin black canopy, with a maximum drop of 3330mm adjustable on installation.

Designed for dining rooms, entrance halls and living spaces with ceiling heights of 2.4m or higher, the Zuma pairs ambient and decorative lighting. The faceted black shade reflects light internally before it passes downward through the chain fringe, diffusing the output and reducing glare. The six E27 sockets accept any standard bulb up to 60W each (sold separately), allowing control over light temperature and intensity. When positioned 700-900mm above a dining table, the fringe creates visual interest without obstructing sightlines across the table.

The satin black finish on the shade and canopy provides a low-sheen surface that reads almost matte under most lighting, while the gold-tone chain fringe introduces warmth and movement to the otherwise rigid geometry. The combination works in both monochrome contemporary interiors and spaces with warm metallic accents. The chandelier weighs approximately 4.5kg when fully assembled, and the 3050mm cable length allows the drop to be adjusted from a minimum of 474mm to the full 3330mm during fitting.

What bulbs does the Zuma take?

The chandelier has six E27 sockets, each accepting any standard Edison screw bulb up to 60W. Bulbs are sold separately. Most users pair this with warm-white LED bulbs between 6-10W and 2700K-3000K for dining or living spaces.

What ceiling height is needed?

The adjustable drop ranges from 474mm minimum to 3330mm maximum. For a dining table, the chandelier typically hangs 700-900mm above the surface, which works in rooms with ceiling heights of 2.4m or above. The cable is cut to length during installation.

How is the chain fringe maintained?

The gold-tone metal chains can be dusted with a soft dry cloth or feather duster. For more thorough cleaning, individual chains can be wiped with a barely-damp microfibre cloth. Avoid pulling or tugging on the chains, as they are individually attached to the shade frame.

Is the chandelier dimmable?

Dimming depends on the bulbs chosen and the dimmer switch installed. If using dimmable LED bulbs, pair them with a compatible LED dimmer for best results. Consult the bulb packaging or manufacturer for specific dimmer compatibility.