Description
This running man arrow up legend kit provides two replacement or additional directional legends for Knightsbridge EM range emergency exit signs. Each polycarbonate legend measures 300mm wide by 156mm high and shows a running man figure with an upward-pointing arrow, indicating the escape route direction in buildings where the exit is located above the sign position.
Designed for use with Knightsbridge EMEXIT, EMLREC, EMLSUS and EMXST emergency lighting models, the legends clip or slot into the face of the exit sign housing to update the directional information without replacing the entire fitting. This is common when internal layouts change, when signs are repurposed during refits, or when installing additional exit route markers in multi-storey buildings where stairs lead upwards to final exits.
The polycarbonate construction resists impact and maintains clarity under continuous illumination from the sign's internal LED or lamp source. The IP20 rating confirms the legends are suitable for indoor installation in dry environments such as offices, retail units, hotels, schools and residential blocks. Each kit contains two legends, allowing simultaneous updates to a pair of exit signs or providing a spare for future use.
Specification
| Length |
300 mm |
| Height |
156 mm |
| Construction |
Polycarbonate |
| IP Rating |
IP20 |
| Warranty |
3 |
Downloads
Product Specification Sheet
Frequently Asked
Which Knightsbridge exit signs are these legends compatible with?
The legends fit EMEXIT, EMLREC, EMLSUS and EMXST models in the Knightsbridge EM range. Check the model number on the back of your existing exit sign to confirm compatibility before ordering.
How are the legends fitted to the sign?
The legends typically clip or slot into the face of the exit sign housing. The exact fitting method depends on the specific EM range model you're using. Refer to the installation instructions for your sign or the datasheet linked above for fitting guidance.
Can these be used outdoors?
No. The IP20 rating confirms these legends are designed for indoor use only in dry environments. For outdoor or damp locations you would need a higher IP-rated exit sign and legend combination.
Why does the kit contain two legends?
Packing two legends per kit allows you to update a pair of exit signs at once or keep a spare for future layout changes without ordering again.