Description
The Reflek is a 104cm linear outdoor wall light with an integrated 20W LED module housed in an anthracite powder-coated aluminium body. The LED casts 3000K warm white light downwards through a glass diffuser strip, creating indirect illumination along the wall surface below the fitting. The 50mm projection from the wall keeps the fitting discreet while the 1040mm length provides coverage across wider wall spans.
Designed for outdoor installation on residential facades, garden walls, and commercial exteriors, the Reflek suits positions where indirect wall washing is needed rather than direct spotlighting. The IP54 rating protects against dust ingress and water splashes from any direction, making the fitting suitable for sheltered outdoor locations such as covered patios, terrace walls, carport entrances, and under soffit mounting. The anthracite finish pairs with contemporary rendered facades, timber cladding, and darker masonry.
The aluminium body is powder-coated for corrosion resistance, giving the fitting durability in typical UK coastal and urban outdoor conditions. The integrated LED is non-dimmable and rated for a typical lifespan of 25,000-30,000 hours, reducing replacement frequency compared to traditional halogen outdoor fittings. The glass diffuser spreads the light output evenly across the 104cm length without visible LED hotspots, and the downward orientation minimises direct glare when the fitting is mounted at or above eye level.
Specification
| Length (mm) |
1040 |
| Projection (mm) |
50 |
| Dimmable |
No |
| Number Of Bulbs |
1 |
| Colour Temperature |
3000K |
| IP Rating |
IP54 |
| Warranty |
5 Years |
Frequently Asked
Can this be used in fully exposed outdoor positions?
The IP54 rating protects against dust and water splashes from any direction, so the fitting can be used in sheltered outdoor positions such as under eaves, covered patios, or terrace walls. For fully unsheltered positions exposed to driving rain, a higher IP rating (IP65 or IP66) would be more appropriate.
Is the LED replaceable?
The LED module is integrated into the fitting and is not user-replaceable. The LED is rated for 25,000-30,000 hours typical lifespan, which equates to approximately 10-15 years of use at 5-6 hours per night.
What direction does the light face?
The Reflek casts light downwards along the wall surface below the fitting, creating indirect wall wash illumination rather than projecting light outwards or upwards. This makes it suitable for accent lighting along walls rather than area or path lighting.
How is it mounted to the wall?
The fitting mounts via a rear fixing plate that secures to the wall with appropriate fixings for the substrate (masonry bolts for brick or block, coach screws for timber cladding). The mains cable enters through a rear cable entry point in the backplate. Installation should be carried out by a qualified electrician.