Free Delivery on all orders over £99*

60 Degree UFO Highbay Reflector - Silver

£3099
The RRP is the manufacturer's recommended retail price of the item.
Available to Order - Contact us for current stock and delivery times
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This is the 60 degree reflector made for a UFO highbay, and it is the shade rather than the light itself. The photograph shows a shallow bowl, wide and open at the bottom, tapering to a recessed circular seat at the top where it meets the body of the fitting, with a rolled rim running right around the wide edge. The surface is a bright metallic silver, the kind of finish a reflector needs, because the job of the part is to catch light that would otherwise spill sideways and send it back down. The 60 degrees in the name is the beam angle it is built to produce.

Highbays are mounted high, over warehouse aisles, workshop floors, factory bays, sports halls and large retail spaces, and the higher the mounting point the more the beam angle matters. A wide spread from ten metres up throws a lot of light at walls, racking sides and the ceiling void. Narrowing that spread concentrates the same output into a smaller circle on the floor, which is what you want over aisles and workstations where the working plane is what counts. The trade off is coverage: a tighter cone means each fitting lights a smaller patch, so spacing is usually closer. If you are lighting an open hall with nothing tall in it, a wider spread may suit you better.

One thing we will not guess at is fit. The supplier has published the beam angle and nothing further, so we have no diameter, no weight, no material and no list of the highbay models this seats against. Measure the body of your fitting and ask us before you order rather than working from the picture. Once it is up, keep the inside clean: dust on any reflective surface returns less light than a clean one, and a dry cloth on a cold, isolated fitting is all it takes.

Specification
Product type Reflector for a UFO highbay fitting
Beam angle 60 degrees
Finish Silver, as shown in the photograph
IP rating Not stated by the manufacturer
Dimmable Not stated by the manufacturer
Sold as One reflector
Minimum order 1, sold in multiples of 1
Frequently Asked

What does a 60 degree beam angle mean in practice?

It describes the width of the cone of light leaving the fitting. A smaller number puts the same output onto a smaller area of floor, so 60 degrees suits higher mounting heights and aisle lighting.

Will this reflector fit my UFO highbay?

We cannot promise that it will. The supplier publishes no diameter and no compatibility list, so measure the body of your fitting and send us the figure before you order.

Does this listing include the highbay itself?

No. This is the reflector on its own, and the record lists no fitting, driver or fixings alongside it, so order the highbay separately.

What is the reflector made from?

The manufacturer does not state a material. The photograph shows a bright metallic silver surface, but we are not willing to name the metal from an image alone.

Does it carry an IP rating?

None is stated on the specification or on the pack, so we make no claim about water or dust protection and would treat this as an indoor part.

Does fitting a reflector change whether the light dims?

Dimming is a function of the highbay and its driver, not of the shade fitted over it. The supplier states nothing about dimming on this part.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This is the 60 degree reflector made for a UFO highbay, and it is the shade rather than the light itself. The photograph shows a shallow bowl, wide and open at the bottom, tapering to a recessed circular seat at the top where it meets the body of the fitting, with a rolled rim running right around the wide edge. The surface is a bright metallic silver, the kind of finish a reflector needs, because the job of the part is to catch light that would otherwise spill sideways and send it back down. The 60 degrees in the name is the beam angle it is built to produce.

    Highbays are mounted high, over warehouse aisles, workshop floors, factory bays, sports halls and large retail spaces, and the higher the mounting point the more the beam angle matters. A wide spread from ten metres up throws a lot of light at walls, racking sides and the ceiling void. Narrowing that spread concentrates the same output into a smaller circle on the floor, which is what you want over aisles and workstations where the working plane is what counts. The trade off is coverage: a tighter cone means each fitting lights a smaller patch, so spacing is usually closer. If you are lighting an open hall with nothing tall in it, a wider spread may suit you better.

    One thing we will not guess at is fit. The supplier has published the beam angle and nothing further, so we have no diameter, no weight, no material and no list of the highbay models this seats against. Measure the body of your fitting and ask us before you order rather than working from the picture. Once it is up, keep the inside clean: dust on any reflective surface returns less light than a clean one, and a dry cloth on a cold, isolated fitting is all it takes.

    Specification
    Product type Reflector for a UFO highbay fitting
    Beam angle 60 degrees
    Finish Silver, as shown in the photograph
    IP rating Not stated by the manufacturer
    Dimmable Not stated by the manufacturer
    Sold as One reflector
    Minimum order 1, sold in multiples of 1
    Frequently Asked

    What does a 60 degree beam angle mean in practice?

    It describes the width of the cone of light leaving the fitting. A smaller number puts the same output onto a smaller area of floor, so 60 degrees suits higher mounting heights and aisle lighting.

    Will this reflector fit my UFO highbay?

    We cannot promise that it will. The supplier publishes no diameter and no compatibility list, so measure the body of your fitting and send us the figure before you order.

    Does this listing include the highbay itself?

    No. This is the reflector on its own, and the record lists no fitting, driver or fixings alongside it, so order the highbay separately.

    What is the reflector made from?

    The manufacturer does not state a material. The photograph shows a bright metallic silver surface, but we are not willing to name the metal from an image alone.

    Does it carry an IP rating?

    None is stated on the specification or on the pack, so we make no claim about water or dust protection and would treat this as an indoor part.

    Does fitting a reflector change whether the light dims?

    Dimming is a function of the highbay and its driver, not of the shade fitted over it. The supplier states nothing about dimming on this part.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.