Free Delivery on all orders over £99*

27W IP65 6ft Non-Corrosive LED Batten - 4000K Cool White

£3799
The RRP is the manufacturer's recommended retail price of the item.
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This is a 6ft LED batten, 1800mm long, drawing 27W and putting out 3,200lm at 4000K. That colour temperature sits at the cool white end of neutral: light with no yellow cast in it, which is why it is the usual choice for working areas where you want to read labels, see colours properly and pick out detail rather than create a soft evening mood. The whole unit is rated IP65, which means the housing is sealed against dust ingress and against water jets from any direction, and it is specified as a non-corrosive fitting (NCF).

Battens like this earn their keep in the rooms nobody decorates. A garage, a workshop, a cellar, a stock room, a utility area, a plant room or a service corridor: places where the job is even light over a long run rather than a focal point. At 1800mm it covers a workbench or an aisle end to end from a single fitting, and because a batten surface mounts flat against a ceiling or a wall you give up almost no headroom to it. If you are lighting a wider floor, plan the fittings in parallel runs and think about the gap between those runs before you order, because two battens set well apart give a flatter, more usable spread than one in the middle.

The photograph shows the build plainly: a full length translucent diffuser, grey end caps, metal toggle clips along the seam that pull the cover down onto the body, and a cable gland entering at one end. Those clips are what makes the seal do its work, so they want to be fully closed. It is a non-dimmable fitting, so it belongs on a plain switched circuit rather than a dimmer module. No fluorescent wattage equivalent is published for it, so if you are swapping out an older twin tube fitting, compare the 3,200lm figure and not the watts.

Specification
Wattage 27W
Light output 3,200lm
Colour temperature 4000K
Colour appearance Cool white
Light source LED
Length 1800mm (6ft)
IP rating IP65
Dimmable No
Housing Sealed non-corrosive body with clip-down diffuser and a cable gland at one end
Sold as One batten
Minimum order 1, sold in multiples of 1
Frequently Asked

How much light is 3,200 lumens over a single garage?

It is a good working level for a single garage or a small workshop, bright enough for a bench without needing a second fitting directly above it.

Can I run this from a dimmer switch?

No. It is non-dimmable, so wire it to an ordinary switched lighting circuit and leave dimmer modules and trailing edge dimmers out of the design.

What does the IP65 rating actually cover?

IP65 describes a housing sealed against dust getting in and against water jets from any direction, which is why the diffuser clips down onto a gasketed body.

Is 4000K too cold for a home garage or loft?

4000K reads as a clean white with no warmth to it. Most people prefer it in working spaces and keep warmer 2700K light for living rooms.

Does it replace a 6ft fluorescent twin tube fitting?

The manufacturer publishes no fluorescent wattage equivalent for this batten, so judge it on the stated 3,200lm output rather than on any watts-for-watts comparison.

How many do I receive, and is there an order minimum?

One batten per unit, and the minimum order is one, sold in multiples of one, so you can buy a single fitting or a full run.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This is a 6ft LED batten, 1800mm long, drawing 27W and putting out 3,200lm at 4000K. That colour temperature sits at the cool white end of neutral: light with no yellow cast in it, which is why it is the usual choice for working areas where you want to read labels, see colours properly and pick out detail rather than create a soft evening mood. The whole unit is rated IP65, which means the housing is sealed against dust ingress and against water jets from any direction, and it is specified as a non-corrosive fitting (NCF).

    Battens like this earn their keep in the rooms nobody decorates. A garage, a workshop, a cellar, a stock room, a utility area, a plant room or a service corridor: places where the job is even light over a long run rather than a focal point. At 1800mm it covers a workbench or an aisle end to end from a single fitting, and because a batten surface mounts flat against a ceiling or a wall you give up almost no headroom to it. If you are lighting a wider floor, plan the fittings in parallel runs and think about the gap between those runs before you order, because two battens set well apart give a flatter, more usable spread than one in the middle.

    The photograph shows the build plainly: a full length translucent diffuser, grey end caps, metal toggle clips along the seam that pull the cover down onto the body, and a cable gland entering at one end. Those clips are what makes the seal do its work, so they want to be fully closed. It is a non-dimmable fitting, so it belongs on a plain switched circuit rather than a dimmer module. No fluorescent wattage equivalent is published for it, so if you are swapping out an older twin tube fitting, compare the 3,200lm figure and not the watts.

    Specification
    Wattage 27W
    Light output 3,200lm
    Colour temperature 4000K
    Colour appearance Cool white
    Light source LED
    Length 1800mm (6ft)
    IP rating IP65
    Dimmable No
    Housing Sealed non-corrosive body with clip-down diffuser and a cable gland at one end
    Sold as One batten
    Minimum order 1, sold in multiples of 1
    Frequently Asked

    How much light is 3,200 lumens over a single garage?

    It is a good working level for a single garage or a small workshop, bright enough for a bench without needing a second fitting directly above it.

    Can I run this from a dimmer switch?

    No. It is non-dimmable, so wire it to an ordinary switched lighting circuit and leave dimmer modules and trailing edge dimmers out of the design.

    What does the IP65 rating actually cover?

    IP65 describes a housing sealed against dust getting in and against water jets from any direction, which is why the diffuser clips down onto a gasketed body.

    Is 4000K too cold for a home garage or loft?

    4000K reads as a clean white with no warmth to it. Most people prefer it in working spaces and keep warmer 2700K light for living rooms.

    Does it replace a 6ft fluorescent twin tube fitting?

    The manufacturer publishes no fluorescent wattage equivalent for this batten, so judge it on the stated 3,200lm output rather than on any watts-for-watts comparison.

    How many do I receive, and is there an order minimum?

    One batten per unit, and the minimum order is one, sold in multiples of one, so you can buy a single fitting or a full run.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.