Free Delivery on all orders over £99*

PIR Motion Sensor IP44 - JQ 30 Black 23458

£1099
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The JQ 30 Black (article ALER JQ-30-B/B) is a passive infrared (PIR) motion sensor that switches connected lighting on when it detects movement within range. It runs from a standard 220-240V AC mains supply and is built from durable plastic in a black finish to sit discreetly against darker walls and surfaces. As a PIR detector it responds to the heat and movement of people passing through its field of view, making it a practical control for entrances, hallways, stairwells and outbuildings.

Rated IP44, it copes with splashes and damp from sheltered positions such as a covered porch, garage or utility area, though it is not intended for fully exposed sites exposed to direct water jets. It wires in line with the luminaire it controls, so check the maximum load and detection requirements suit your fitting before installation. We also stock a wider selection of motion and daylight sensors to match different detection ranges and mounting needs.

Specification
Input voltage 220-240 AC
IP rating IP44
Material Plastic
Colour Black
Frequently Asked

What is the detection range and angle?

As a passive infrared sensor it detects the movement of people across its field of view, typically over a wide horizontal arc within a few metres. Position it so the area you want covered falls across its line of sight rather than directly towards it for the most reliable triggering.

What is the maximum load it can switch?

The sensor switches connected lighting in line with the circuit, so always check the rated load against the total wattage of the fittings you are controlling. Staying within the stated maximum protects both the sensor and the connected luminaires.

Can the time and light level be adjusted?

PIR sensors of this kind commonly allow the hold-on time and daylight (lux) threshold to be set so the light stays on for a chosen period and only activates in low light. Refer to the supplied instructions to fine-tune these settings for your location.

Can it be used outdoors?

It is rated IP44, so it is suitable for sheltered and damp positions such as a covered porch or garage entrance. Keep it clear of fully exposed locations subject to direct rain or water jets, where a higher IP rating would be needed.

Downloads

Product Specification Sheet

Range Datasheet

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The JQ 30 Black (article ALER JQ-30-B/B) is a passive infrared (PIR) motion sensor that switches connected lighting on when it detects movement within range. It runs from a standard 220-240V AC mains supply and is built from durable plastic in a black finish to sit discreetly against darker walls and surfaces. As a PIR detector it responds to the heat and movement of people passing through its field of view, making it a practical control for entrances, hallways, stairwells and outbuildings.

    Rated IP44, it copes with splashes and damp from sheltered positions such as a covered porch, garage or utility area, though it is not intended for fully exposed sites exposed to direct water jets. It wires in line with the luminaire it controls, so check the maximum load and detection requirements suit your fitting before installation. We also stock a wider selection of motion and daylight sensors to match different detection ranges and mounting needs.

    Specification
    Input voltage 220-240 AC
    IP rating IP44
    Material Plastic
    Colour Black
    Frequently Asked

    What is the detection range and angle?

    As a passive infrared sensor it detects the movement of people across its field of view, typically over a wide horizontal arc within a few metres. Position it so the area you want covered falls across its line of sight rather than directly towards it for the most reliable triggering.

    What is the maximum load it can switch?

    The sensor switches connected lighting in line with the circuit, so always check the rated load against the total wattage of the fittings you are controlling. Staying within the stated maximum protects both the sensor and the connected luminaires.

    Can the time and light level be adjusted?

    PIR sensors of this kind commonly allow the hold-on time and daylight (lux) threshold to be set so the light stays on for a chosen period and only activates in low light. Refer to the supplied instructions to fine-tune these settings for your location.

    Can it be used outdoors?

    It is rated IP44, so it is suitable for sheltered and damp positions such as a covered porch or garage entrance. Keep it clear of fully exposed locations subject to direct rain or water jets, where a higher IP rating would be needed.

    Downloads

    Product Specification Sheet

    Range Datasheet

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.