Description
The Molly is an 80cm circular suspension light built from brushed aluminium ribbon formed into interwoven loops, finished in rose gold with chrome suspension wires. Integrated LED strips run through opal silicone diffusers set into the curves of the aluminium, producing a continuous glow of 3000K warm white light across the full 80cm diameter. The fitting includes a 0-10V dimmable LED driver, a dimmer unit, and a radio frequency remote control for wireless dimming from anywhere in the room.
Designed for dining rooms, open-plan living spaces and bedrooms with ceiling heights of 2.4m or above, the Molly provides both ambient and decorative light. The adjustable drop of 60-150cm allows the pendant to be set 700-900mm above a dining table or 1.2-1.4m above floor level in a lounge, depending on ceiling height and room proportions. The 80cm diameter suits tables of 1.6-2.2m length or seating areas up to 4m square. The fitting weighs 2.22kg and includes gravity toggle fixings for secure installation on plasterboard or solid ceilings.
The rose gold finish is a warm metallic tone produced by anodising or coating the brushed aluminium, giving a softer appearance than polished brass or copper. The opal silicone diffusers eliminate glare and hotspots, distributing the 45W LED output evenly across the room. The interwoven ribbon structure casts minimal shadows and maintains visual lightness despite the large diameter. The IP20 rating limits the fitting to dry interior use only.
Specification
| Height |
30cm |
| Dimension |
80cm |
| Minimum Height |
60cm |
| Maximum Height |
150cm |
| Weight |
2.22kg |
| Energy Class |
F |
| IP |
IP20 |
| Electric Class |
Class 1 |
| Power |
45W |
| Voltage |
180/240V |
| Frequency |
50/60Hz |
| Lumen |
4.05lm |
| Colour Temperature |
3000K |
| CRI |
>90 |
| Finish |
Rose Gold, Opal |
Downloads
Product Specification Sheet
Assembly Instruction
Frequently Asked
How is the light dimmed?
The Molly includes a 0-10V dimmable LED driver, a dimmer unit, and a radio frequency remote control in the box. The remote allows wireless dimming from anywhere in the room without needing to wire a wall dimmer switch. The driver is compatible with 0-10V control systems for integration into smart home setups.
What ceiling height is needed?
The adjustable drop ranges from 60cm to 150cm. For a dining table the pendant typically sits 700-900mm above the surface, which works in rooms with ceiling heights of 2.4m or above. For lounge installations the pendant is often set 1.2-1.4m above floor level, requiring ceilings of 2.6m or higher.
What size table or room does it suit?
The 80cm diameter suits dining tables of 1.6-2.2m length or seating areas up to 4m square. The 45W output and 80cm spread provide adequate ambient light for these spaces without needing additional ceiling fittings.
Can it be installed on a plasterboard ceiling?
Yes. Gravity toggle fixings are included for secure installation on plasterboard ceilings. The 2.22kg weight is well within the load capacity of correctly-fitted toggles. On solid ceilings standard anchors or screws can be used instead.