Description
The Molly is a 110cm circular suspension light built around a sculptural loop frame in brushed rose gold aluminium, with integrated LED strips set behind opal silicone diffusers. The frame twists through three overlapping loops suspended from a rose gold canopy on thin steel cables, creating a kinetic outline when viewed from different angles. The 63W integrated LED system runs at 3000K and delivers diffused general lighting across the full diameter of the fitting.
Designed for double-height entrance halls, large open-plan living areas and dining rooms with ceiling heights above 2.7m, the Molly provides ambient rather than task lighting. The suspension cables adjust between 80cm and 230cm drop, allowing the fitting to be raised or lowered to suit the ceiling height and the intended visual balance in the room. At the lower end of the adjustment range the fitting can hover just above head height as a centrepiece over a large dining table; at full extension it suits tall entrance halls with 3.5-4m ceilings.
The rose gold finish is a warm, soft pink-toned metal that sits between polished copper and brushed brass in tone, pairing with warm greys, creams, blush pinks and deep charcoals in contemporary interiors. The opal silicone diffusers soften the LED output and prevent glare when the fitting is viewed from below. The fitting is dimmable via TRIAC (phase-cut) or 0-10V controls, allowing light levels to be adjusted from full brightness down to a low ambient glow. The IP20 rating restricts use to dry indoor spaces only.
Specification
| Height |
38cm |
| Dimension |
110cm |
| Minimum Height |
80cm |
| Maximum Height |
230cm |
| Weight |
2.4kg |
| Energy Class |
F |
| IP |
IP20 |
| Electric Class |
Class 1 |
| Power |
63W |
| Voltage |
180/240V |
| Frequency |
50/60Hz |
| Lumen |
5.67lm |
| Colour Temperature |
3000K |
| CRI |
>80 |
| Finish |
Rose Gold, Opal |
Downloads
Product Specification Sheet
Assembly Instruction
Frequently Asked
What dimming systems does the Molly support?
The integrated LED is compatible with both TRIAC (phase-cut) and 0-10V dimming protocols. Confirm your dimmer switch supports one of these systems before installation.
What ceiling height is needed?
The minimum drop is 80cm, which suits ceiling heights of 2.7m or above when the fitting is used over a dining table or in an open living area. Taller spaces up to 4m can use the full 230cm extension to keep the fitting visually balanced.
Is the rose gold finish a warm or cool tone?
Rose gold is a warm-toned finish sitting between brushed brass and polished copper in colour. It has a soft pink cast rather than the yellow tone of standard gold finishes.
Can it be used in a bathroom?
No. The IP20 rating restricts the fitting to dry indoor spaces only. It is not suitable for bathrooms, wet rooms or outdoor covered areas.