Description
The Leonor is a tall floor lamp made of rubberwood, linen and iron, standing 130cm high with a linen shade 45cm across at its widest. The column is its defining feature. Broad at the foot, it narrows steadily as it rises, pinches in to a slim waist and then flares out again just below the shade. The shade is a tapered drum, 40cm across at the top, 45cm across at the base and 35cm tall, so it sits generously over the column without overwhelming it. In natural tones throughout, it reads as a quiet, sculptural piece rather than a busy one.
At 130cm tall it is a floor lamp for the side of a sofa, an armchair or a bed, and its slim, tapering column keeps it from crowding a corner or an alcove. The 200cm clear cable gives you some freedom over where it stands in relation to the socket, and a clear flex is less noticeable against floorboards and skirting than a dark one. The switch is on the cord, so you can turn it on and off without reaching up under the shade. It is rated IP20, which makes it a lamp for living rooms, bedrooms, studies and hallways, the dry rooms of the house.
It takes a standard E27 bulb, which is not included. The maximum is LED 5W, CFL 9W or 40W, so check the bulb you have in mind against those figures. Linen softens and spreads light, which suits a lamp meant for evenings rather than close work. It weighs 7.1KG, so it is worth deciding where it will live before you set it up. For styling, let the natural tones of the rubberwood and linen sit alongside woven baskets, jute rugs and other natural materials, or stand it alone against a plain wall where its hourglass waist and long taper can be seen in full.
Specification
| Height |
130cm |
| Diameter |
45cm |
| Material |
Rubberwood, Linen, Iron |
| Colour |
Natural |
| Bulb fitting |
E27 |
| Maximum bulb |
LED 5W / CFL 9W / 40W |
| Bulb included |
No |
| Cable length |
200cm |
| Cable colour |
Clear |
| Switch |
On cord |
| IP rating |
IP20 |
| Shade size |
Height 35cm, Diameter 40cm to 45cm |
| Weight |
7.1KG |
Downloads
Assembly instructions (part 1) (PDF)
Assembly instructions (part 2) (PDF)
Frequently Asked
Is a bulb included with the Leonor floor lamp?
No, the bulb is not included. The lamp takes an E27 bulb, up to a maximum of LED 5W, CFL 9W or 40W.
How tall is the lamp and how big is the shade?
The lamp stands 130cm tall with a diameter of 45cm. The linen shade measures 40cm across at the top, 45cm across at the base and 35cm high.
What is the floor lamp made of?
It is made of rubberwood, linen and iron. The shade is linen, and the whole lamp comes in a natural colour.
Can I use this lamp in a bathroom?
No. It is rated IP20, so it is for dry rooms only, such as a living room, bedroom, study or hallway.
Where is the switch and how long is the cable?
The switch is on the cord, and the cable is 200cm long and clear, so it is easy to run discreetly along a skirting board.
How heavy is the Leonor floor lamp?
It weighs 7.1KG, which is worth knowing if you plan to carry it upstairs or move it between rooms often.