Description
The Helia is a 100cm diameter circular suspension light built from a metal ring finished in gold leaf, with an integrated 110W 3000K LED concealed behind an opal acrylic diffuser. The LED runs the full circumference of the ring, casting light both upwards onto the ceiling and downwards into the room, with the opal acrylic softening the output into an even ambient glow.
Designed for dining areas, open-plan living rooms, hotel lobbies and large entrance halls, the Helia suits spaces with ceiling heights of 2.8m or higher where the 1m diameter ring can hang without overwhelming the room. The adjustable drop ranges from 65cm to 150cm, allowing the pendant to be positioned 700-900mm above a dining table or 1-1.2m above floor level in a double-height entrance depending on the ceiling height. The 110W output is high enough to provide primary lighting in a 20-25m² room without requiring additional ceiling fittings.
The gold leaf finish is applied to the metal frame by hand, creating subtle tonal variation and a warm metallic accent that catches both natural and artificial light. The opal acrylic diffuser hides the individual LED points and prevents glare, making the ring itself appear as a continuous band of light rather than a series of visible bulbs. The pendant weighs 4kg and requires a ceiling rose rated for at least 5kg load bearing. The Class 1 electrical rating means the fitting must be earthed during installation.
The Helia is dimmable when paired with a compatible trailing-edge LED dimmer, allowing the output to be reduced for evening ambient lighting or raised to full 110W for task lighting over a dining table. The IP20 rating limits the pendant to dry indoor use only.
Specification
| Height |
6cm |
| Dimension |
100cm |
| Minimum Height |
65cm |
| Maximum Height |
150cm |
| Weight |
4kg |
| Energy Class |
G |
| IP |
IP20 |
| Electric Class |
Class 1 |
| Power |
110W |
| Voltage |
220/240V |
| Frequency |
50/60Hz |
| Lumen |
6.6lm |
| Colour Temperature |
3000K |
| CRI |
>85 |
| Finish |
Gold Leaf, Opal |
Downloads
Product Specification Sheet
Assembly Instruction
Frequently Asked
Is the Helia dimmable?
Yes. The integrated 110W LED is dimmable when paired with a compatible trailing-edge LED dimmer. Check the dimmer manufacturer's specification to confirm it supports LED loads of at least 110W before installation.
What ceiling height is needed?
The adjustable drop ranges from 65cm to 150cm. For positioning above a dining table the pendant typically hangs 700-900mm above the table surface, which works in rooms with ceiling heights of 2.8m or above. Lower ceilings can accommodate the Helia if the drop is shortened during installation.
What's the light output?
The 110W integrated LED at 3000K provides warm white light with a CRI above 85. The specification lists 6.6lm total output, though this figure appears unusually low for a 110W LED and may be a manufacturer data error. Contact us if you need lumen output confirmed before purchase.
What load rating does the ceiling rose need?
The Helia weighs 4kg. The ceiling rose and fixings must be rated for at least 5kg load bearing. The pendant is Class 1, so an earth connection is required during installation.