Free Delivery on all orders over £99*

GU10 Chrome Recessed Tilt Twist & Lock Downlight

£999
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge RD2C is a GU10 recessed downlight with a 25° tilt mechanism and twist-lock fitting, finished in chrome die-cast aluminium. The fitting accepts standard GU10 mains-voltage halogen or LED bulbs up to 50W (sold separately) and includes a pre-wired 230V GU10 lamp holder. The twist-lock design allows the lamp holder to be rotated and locked into position after the bulb is fitted, securing it in place without additional clips or springs.

Designed for residential ceilings, kitchen zones, hallways and commercial spaces with a minimum 150mm void depth above the ceiling surface, the downlight requires an 80mm cut-out diameter and sits nearly flush with the ceiling once installed, projecting just 2.5mm below the surface. The 25° tilt range allows light to be angled towards walls, artwork or specific zones within a room rather than being locked in a fixed vertical position. The IP20 rating makes it suitable for general interior ceiling zones where moisture exposure is not a concern.

The chrome finish provides a high-polish reflective surface that works with both contemporary and traditional interiors. The die-cast aluminium construction dissipates heat more effectively than plastic alternatives, extending bulb life when paired with halogen lamps and maintaining cooler operating temperatures with LED bulbs. The fitting is Class I earthed and requires connection to a ceiling circuit earth for safe operation. Dimming capability depends on the bulb installed — GU10 LED bulbs labelled as dimmable will work with trailing-edge dimmer switches, while non-dimmable LEDs should be used on switched circuits only.

Specification
Diameter 94 mm
Projection 2.5 mm
Recessed Depth 98 mm
Minimum Void 150 mm
Cut-out Diameter 80 mm
Tilt 25 degrees
Construction Die-cast aluminium
Finish Chrome
Class I
IP Rating IP20
Primary Voltage 230V 50Hz
Lamp Technology Halogen / LED Compatible
Lamp Base GU10/MR16
Lamp Included No
Dimmable Lamp dependent
Max. Wattage 50 W
Warranty 1
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

What ceiling void depth is needed?

A minimum 150mm void depth above the ceiling surface is required to accommodate the 98mm recessed depth of the fitting plus clearance for wiring and heat dissipation. The cut-out diameter is 80mm.

Can the light direction be adjusted after installation?

Yes. The lamp holder tilts up to 25° from vertical, allowing the light beam to be angled towards walls, artwork or specific areas rather than being fixed straight down. The tilt is adjusted by hand once the bulb is installed.

Is it dimmable?

Dimming depends on the GU10 bulb installed. Dimmable GU10 LED bulbs work with trailing-edge dimmer switches. Non-dimmable LEDs and standard halogen bulbs should be used on switched circuits only, not with dimmers.

What's the difference between GU10 and MR16?

GU10 is a mains-voltage (230V) lamp base with a twist-lock bayonet fitting. MR16 is a low-voltage (12V) lamp base requiring a separate transformer. This fitting accepts both, but most users install GU10 bulbs to avoid the need for a transformer.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Takes standard bulbs

Takes standard GU10 bulbs, so you choose the brightness and colour to suit the room.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge RD2C is a GU10 recessed downlight with a 25° tilt mechanism and twist-lock fitting, finished in chrome die-cast aluminium. The fitting accepts standard GU10 mains-voltage halogen or LED bulbs up to 50W (sold separately) and includes a pre-wired 230V GU10 lamp holder. The twist-lock design allows the lamp holder to be rotated and locked into position after the bulb is fitted, securing it in place without additional clips or springs.

    Designed for residential ceilings, kitchen zones, hallways and commercial spaces with a minimum 150mm void depth above the ceiling surface, the downlight requires an 80mm cut-out diameter and sits nearly flush with the ceiling once installed, projecting just 2.5mm below the surface. The 25° tilt range allows light to be angled towards walls, artwork or specific zones within a room rather than being locked in a fixed vertical position. The IP20 rating makes it suitable for general interior ceiling zones where moisture exposure is not a concern.

    The chrome finish provides a high-polish reflective surface that works with both contemporary and traditional interiors. The die-cast aluminium construction dissipates heat more effectively than plastic alternatives, extending bulb life when paired with halogen lamps and maintaining cooler operating temperatures with LED bulbs. The fitting is Class I earthed and requires connection to a ceiling circuit earth for safe operation. Dimming capability depends on the bulb installed — GU10 LED bulbs labelled as dimmable will work with trailing-edge dimmer switches, while non-dimmable LEDs should be used on switched circuits only.

    Specification
    Diameter 94 mm
    Projection 2.5 mm
    Recessed Depth 98 mm
    Minimum Void 150 mm
    Cut-out Diameter 80 mm
    Tilt 25 degrees
    Construction Die-cast aluminium
    Finish Chrome
    Class I
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Lamp Technology Halogen / LED Compatible
    Lamp Base GU10/MR16
    Lamp Included No
    Dimmable Lamp dependent
    Max. Wattage 50 W
    Warranty 1
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    What ceiling void depth is needed?

    A minimum 150mm void depth above the ceiling surface is required to accommodate the 98mm recessed depth of the fitting plus clearance for wiring and heat dissipation. The cut-out diameter is 80mm.

    Can the light direction be adjusted after installation?

    Yes. The lamp holder tilts up to 25° from vertical, allowing the light beam to be angled towards walls, artwork or specific areas rather than being fixed straight down. The tilt is adjusted by hand once the bulb is installed.

    Is it dimmable?

    Dimming depends on the GU10 bulb installed. Dimmable GU10 LED bulbs work with trailing-edge dimmer switches. Non-dimmable LEDs and standard halogen bulbs should be used on switched circuits only, not with dimmers.

    What's the difference between GU10 and MR16?

    GU10 is a mains-voltage (230V) lamp base with a twist-lock bayonet fitting. MR16 is a low-voltage (12V) lamp base requiring a separate transformer. This fitting accepts both, but most users install GU10 bulbs to avoid the need for a transformer.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.