Description
The Folie S/70.2 is a large tiered pendant light with a white translucent ribbon shade, gathered into fine vertical pleats. A narrow cylinder sits at the top, then the shade flares into a wide cone, with a black ring at the waist where they meet and a second, shorter tier beneath. The shade is 70cm across and the pendant measures 247cm in height overall, hanging on 150cm of cable from a round canopy 14cm across and 2.7cm deep. It takes five E27 bulbs of up to 15W each, sold separately and not included in the box, so you choose your own; the translucent ribbon lets their light glow through every tier.
At this size it belongs above a dining table or in a living room with a high ceiling, where a single pendant can light the room and give it a clear centre. Over a long table it draws people together at mealtimes; in a living room it suits a generous space where a small fitting would look lost. The pleated white ribbon brings softness and texture to a room of harder surfaces, such as wood, stone or plaster. It is rated IP20, so it is for dry rooms indoors only.
The structure is steel and aluminium, finished in black, and it carries the white translucent ribbon shade across both tiers, with the black ring marking the join at the waist. It runs on 230V mains power and is a Class I fitting, so it needs an earthed supply, and it is wired in by a qualified electrician. The design is by Christophe Mathieu. Before you order, check your ceiling height against the pendant's 247cm overall height and the 150cm of cable it hangs on, so it sits well above your table or seating.
Specification
| Structure |
Black |
| Shade |
White Translucent Ribbon |
| Material |
Steel & Aluminium |
| Canopy Diameter |
14cm |
| Canopy Height |
2.7cm |
| Cable Length |
150cm |
| Shade Height |
86cm and 97cm |
| Height |
247cm |
| Shade Diameter |
70cm |
| Light Source |
5 x E27 (bulbs not included) |
| Max Bulb Wattage |
15W per bulb |
| Power |
Mains, wired in by an electrician |
| Voltage |
230V |
| IP Rating |
IP20 |
| Protection Class |
Class I |
| Lead time |
Made to order, usually delivered in 4 to 8 weeks |
Frequently Asked
What bulbs does the Folie S/70.2 pendant take?
It takes five E27 bulbs of up to 15W each. The bulbs are not included, so buy them alongside the pendant.
How big is the Folie S/70.2?
The shade is 70cm across and the pendant measures 247cm in height overall, with 150cm of cable and a canopy 14cm across and 2.7cm deep.
Can this pendant go in a bathroom?
No. It is rated IP20, so it is for dry rooms only, such as a dining room or a living room.
How is the pendant installed?
It runs on 230V mains power and is wired in by a qualified electrician. It is a Class I fitting, so it needs an earthed supply.
What is the Folie S/70.2 made of?
The structure is steel and aluminium in black, and the shade is a white translucent ribbon, finely pleated around both tiers of the pendant.
How long will it take to arrive?
It is made to order for you, so it is usually delivered in 4 to 8 weeks.