Description
We stock the Flarity as a surface-mounted pendant track rail in brushed brass, the linear backbone of a modular track lighting system. It is an extruded aluminium profile with a brushed brass finish that runs on 24V DC and carries compatible low-voltage pendant fittings, giving you a warm metallic rail that pairs with brass, gold or copper pendants.
It suits dining areas, kitchen islands, retail displays and hospitality spaces where pendant positions need to flex. The rail mounts straight to the ceiling through the concealed fixing channel, and pendants can be added, removed or slid along its length after installation without any re-wiring.
Because the system is 24V DC, the pendant cables carry low voltage rather than mains, which allows slimmer cabling; a remote 24V transformer (sold separately) feeds power from the ceiling rose. It carries an IP20 rating for dry interiors only, so it is not for bathrooms, wet rooms or outdoor canopies, and sections join end to end with connectors (sold separately) for longer runs.
Specification
| IP Rating |
IP20 |
| Voltage |
DC 24V |
| Dimmable |
No |
| Material |
Aluminium |
| Finish |
Brass |
Downloads
Product datasheet
Frequently Asked
What finish is the track?
It is an aluminium profile with a brushed brass finish, so it gives a warm metallic accent that works well alongside brass, gold or copper pendant fittings.
What fittings and power does it need?
It takes 24V DC pendants from this Flarity system (sold separately) and needs a compatible remote 24V transformer (also sold separately). Standard mains-voltage track heads will not fit.
Can I make a longer run?
Yes. Sections join end to end using compatible connectors (sold separately), so you can extend the rail to suit a longer island or run of pendants.
Is it suitable for a bathroom?
No. The IP20 rating limits it to dry indoor locations, so we would not fit it in a bathroom, wet room or any outdoor position.