Energizer 9.2W LED GLS Bulb B22 Warm White 3000K Non-Dimmable

The Energizer 9.2W LED GLS bulb uses a B22 bayonet cap fitting and produces 806 lumens of warm white 3000K light from a standard GLS (General Lighting Service) shape. The frosted glass diffuser spreads light evenly in all directions, making it suitable for table lamps, ceiling pendants and wall lights where the bulb is visible or where omni-directional light distribution is needed.

Designed for general residential lighting, this bulb fits standard B22 bayonet sockets in living rooms, bedrooms, hallways and dining rooms. The 3000K colour temperature produces a warm white tone similar to traditional incandescent bulbs, avoiding the cooler blue-white cast of higher-Kelvin LEDs. At 806 lumens output, it delivers equivalent brightness to a traditional 60W incandescent while consuming 9.2W, reducing energy use by approximately 85 per cent.

The bulb measures 60mm diameter by 119mm height, matching the proportions of a classic GLS incandescent. This means it fits within the same lampshade clearances and fixture housings without protruding or requiring adapters. The non-dimmable circuit delivers consistent 806-lumen output on standard mains switching — attempting to use this bulb with a dimmer switch will cause flicker or failure and may damage the driver circuitry.

The F energy rating under current UK labelling reflects LED technology performance against the revised efficiency scale introduced in 2021, where A-rated bulbs are reserved for future ultra-efficient technologies. This bulb still consumes significantly less energy than halogen or incandescent equivalents despite the F label.

Is this bulb dimmable?

No. This is a non-dimmable LED bulb. Using it with a dimmer switch will cause flicker, reduced lifespan or immediate failure. If you need dimmable B22 GLS bulbs, search for "dimmable B22" on the Niori site to find compatible alternatives.

What's the equivalent incandescent wattage?

At 806 lumens, this 9.2W LED produces approximately the same light output as a traditional 60W incandescent bulb, reducing energy consumption by around 85 per cent.

What does 3000K warm white look like?

3000K produces a warm white light with a slight yellow-orange tone, similar to halogen bulbs and warmer than daylight. It's commonly used in living rooms, bedrooms and dining areas where a relaxed atmosphere is preferred over the cooler, clinical tone of 4000K or 6000K bulbs.

Will it fit my existing B22 lampshade or fixture?

The 60mm diameter and 119mm height match standard GLS incandescent proportions. If your existing B22 incandescent or halogen bulb fits comfortably, this LED replacement should fit the same clearances without modification.