Emberara Tiered Crystal Chandelier 12 Light E14 - Gold 500mm

The Emberara is a 500mm diameter crystal chandelier built on a polished gold metal frame with three descending tiers of cut crystal rods and beaded strands. Twelve E14 bulb holders sit within the upper tier, each bulb surrounded by vertical crystal rods that refract and multiply the light across the room. The crystal elements are arranged in alternating lengths, creating a waterfall effect that extends 690mm from the ceiling canopy to the lowest point.

Designed for dining rooms, entrance halls and double-height spaces with ceiling heights of 2.7m or above, the Emberara requires a minimum 500mm clearance below the chandelier to avoid head-height issues. The 12-bulb configuration provides substantial illumination when fitted with 40W-equivalent LED candle bulbs, making it suitable for rooms of 15-25m² where central ambient light is the primary source. The chandelier is dimmable when paired with compatible LED bulbs and a trailing-edge dimmer.

Each tier of the chandelier holds a mix of faceted crystal rods and smaller crystal beads threaded onto wire strands, all suspended from the gold circular frame. The crystal catches daylight during the day and creates prismatic colour shifts across walls and ceilings when the bulbs are lit in the evening. The polished gold finish on the metal framework reflects warm tones and pairs with warm whites, creams, deep greens and classical interiors where metallic accents are already present.

What bulbs does the Emberara take?

The chandelier takes 12 E14 small Edison screw bulbs, sold separately. Most users fit 40W-equivalent LED candle bulbs in warm white (2700K-3000K) to balance light output with the crystal reflections.

Is it suitable for sloped or vaulted ceilings?

The chandelier is designed for flat ceilings with a standard ceiling rose. Installation on sloped ceilings requires an angled ceiling rose adaptor, which is not included. Consult a qualified electrician before attempting installation on a non-horizontal surface.

How is the crystal cleaned?

Switch off the mains and allow the bulbs to cool. Wipe each crystal rod individually with a dry microfibre cloth. For stubborn marks, a barely-damp cloth with distilled water works, but avoid soaking the crystal or letting water reach the metal frame or electrical components.

What ceiling height is needed?

With a 690m drop from canopy to lowest crystal, the chandelier works in rooms with ceiling heights of 2.7m or above to maintain a minimum 500mm clearance below the lowest point. In lower rooms the chandelier may present a head-height obstruction.