Description
The Display Accent is a slim linear module that clips onto a magnetic track and carries a row of small recessed lenses along its length. Each cell is set back behind a baffle, so the source stays out of view and the glare reads low at UGR under 16, while the beam lands as a controlled 48 degree wash. Fitted, it reads as a narrow 1065mm bar just 32mm wide and 73mm deep; lit, it draws an even line of crisp light along a wall, shelving or a work zone rather than one bright point.
This head runs at 4000K, a neutral white that keeps whites clean and detail sharp, giving 4100 lumens from 26W with a rendering index above 90 so materials look accurate. The 48 degree spread falls between a tight accent and a broad flood, which suits a gallery hang, a shop fit-out or a task area where even directed light is wanted and the lamp should never show. The head is adjustable on the track, and a run of modules can share one profile.
The body is coated aluminium in matt white, made to disappear into a pale ceiling and a white magnetic track. The LED is integrated and included, rated for 50,000 hours, so there is nothing to relamp. Dimming is DALI with the driver built in, and it is rated IP20 for dry indoor rooms. Power comes off the track, so the Link 3-phase 1-10V/DALI profile it mounts on is bought separately.
Specification
| Number of lights |
Linear / continuous |
| Light source |
Integrated LED, 26W total (4100lm, 50,000h) |
| Colour temperature |
4000K (neutral white) |
| Lumen output |
4100lm (3400lm useful) |
| Colour rendering (CRI) |
> 90 |
| Beam angle |
48 degrees |
| Glare rating |
UGR < 16 |
| Length |
1065mm |
| Width |
32mm |
| Height |
73mm |
| IP rating |
IP20 (indoor) |
| Dimmable |
Yes, DALI |
| Power system |
Magnetic track, in-built driver (Link 3-phase 1-10V/DALI profile sold separately) |
| Frame / Structure finish |
Matt white aluminium |
| Materials |
Coated aluminium body |
Downloads
Datasheet
Assembly Instructions
3D Model
Frequently Asked
What kind of light does the Display Accent give?
A low-glare directed wash in neutral white. A run of recessed lenses throws an even 48 degree spread at 4100 lumens and 4000K, the source behind a baffle so glare stays under UGR 16. Colour rendering is above 90, so art and stock keep their true colour.
Does it arrive ready to light, and is a bulb needed?
The LED module is built in and included, rated at 26W with a 50,000 hour life, so there is no bulb to source. The driver is built in as well. It clips onto a live magnetic track, which carries the supply, and lights once seated.
Can it be dimmed?
Yes, over DALI. The module holds one DALI driver, so it dims through a DALI controller or system rather than a plate dimmer, in step with other heads on the same track.
Is the track supplied, and how big is it?
The bar is 1065mm long, 32mm wide and 73mm deep. The magnetic track profile is a separate accessory (Link 3-phase 1-10V/DALI), so the module joins a track ordered for the run. In matt white it suits a gallery wall, retail fit-out or a task area.