Daylight LED Wall Light - Black

We stock the Daylight as a 10W LED wall light with a circular stone-effect diffuser set within a black metal frame. The integrated LED gives 250 lumens of warm white light at 3000K, and the textured diffuser is split into segments around a central void so it reads as a decorative circle on the wall even when it is switched off.

We use it in hallways, on landings and as bedroom accent lighting, anywhere you want an ambient wash rather than the hard edges of a traditional wall bracket. The wide 180 degree beam angle spreads light across roughly a 2 to 3 metre width of wall from a single mounting point, and the stone-effect finish pairs naturally with neutral, earth-toned and contemporary interiors.

The metal frame sits close against the wall with minimal projection, and the LED is integrated, so there is no bulb to buy or replace. Running at 10W it stays cooler than an equivalent halogen fitting and holds its 3000K colour temperature consistently over time. It has a colour rendering index of 80, runs on 220-240V AC mains, and carries an IP20 rating for dry indoor use only. It is not dimmable.

Product datasheet

Where can I fit this wall light?

It is rated IP20 for dry indoor use only, so we recommend hallways, landings, living rooms and bedrooms. We would not fit it in a bathroom or anywhere exposed to moisture.

Is it dimmable?

No. The integrated LED runs at a fixed 10W output of 250 lumens at 3000K, so it is not designed to work with a dimmer switch.

Do I need to buy a bulb?

No. The LED is built into the fitting, so there is nothing extra to buy and no bulb to replace over its life.

What sort of light does it give?

A warm white 3000K light with a wide 180 degree beam angle, which washes roughly a 2 to 3 metre width of wall from one mounting point for a soft, ambient effect rather than a bright task beam.