Creek Angled Outdoor CCT LED Wall Light 20W - Rust Brown

The Creek is a 268mm wide angled outdoor wall light with a 20W integrated LED and switchable colour temperature control. The rust brown powder-coated aluminium frame surrounds a rectangular diffuser panel, with the angled profile projecting 87mm from the wall to cast light both downward and outward in a 120° beam pattern. The CCT switch on the fitting allows selection between 2700K extra warm white, 3300K warm white, and 4000K cool white without changing the bulb.

Designed for external walls on residential properties, garden buildings and terraces, the Creek fits where ambient wall-washing or pathway illumination is needed without the bulk of a larger flood or bulkhead fitting. The 1600lm output from the 20W LED covers a wall section of approximately 3-4m width at typical mounting heights of 1.8-2.4m. The IP65 rating protects the LED module and driver against rain and dust ingress, making the fitting suitable for exposed positions including under eaves, on boundary walls and around entrances.

The rust brown finish is a mid-tone powder coat over aluminium, closer to a terracotta or oxide red-brown than a dark chocolate brown. It pairs well with brick, natural stone, timber cladding and terracotta roof tiles in both traditional and modern builds. The angled profile reduces glare when viewed from below compared to a flat front-facing fitting, while the rectangular shape fits neatly into corners, alongside windows and at regular intervals along fence lines.

How do you change the colour temperature?

A CCT switch accessible during installation allows selection between 2700K, 3300K and 4000K. The switch is set once during fitting and is not user-accessible afterward without removing the cover. The colour temperature cannot be changed remotely or via a dimmer switch.

Is the Creek suitable for coastal or exposed locations?

The IP65 rating provides protection against heavy rain and dust ingress, making the fitting suitable for most UK outdoor environments. In coastal areas subject to salt spray, periodic cleaning with fresh water will help maintain the finish on the powder-coated aluminium.

What mounting surface does it require?

The Creek mounts to any solid vertical surface capable of supporting 0.36kg and accepting standard wall plugs or masonry fixings. A weatherproof junction box or external wiring point is required behind the mounting position. The fitting is not designed for soffit or horizontal mounting.

How wide an area does it illuminate?

The 120° beam angle and 1600lm output typically cover a wall section 3-4m wide when mounted at heights of 1.8-2.4m. For pathway lighting, mounting multiple fittings at 4-5m intervals provides continuous coverage without dark gaps.