Description
This is a round bulkhead light with a white body and a shallow white diffuser set into the rim. The light source is built in, so there is no cap to match and no separate lamp to buy alongside it. The part worth knowing is the colour temperature: this is a three CCT fitting, so the same unit can be set to one of three white tones rather than committing you to a single colour of light at the moment you order. The manufacturer does not publish the three Kelvin values, so check the fitting's own instructions before you set it.
Bulkheads earn their keep where a pendant would be in the way. A hallway ceiling, a landing, a stairwell, the underside of a garage joist, a utility room or a store cupboard: anywhere the fitting needs to sit close to the surface and out of reach of heads and ladders. The white diffuser spreads light across the whole face rather than throwing a bright point at the eye, which is what makes a fitting of this kind comfortable in a corridor you walk through rather than sit in. White against a white ceiling all but disappears.
Each listing is one fitting and you can order a single one, with no multiple to buy into. The manufacturer does not state an IP rating, so treat this as a dry indoor fitting and keep it away from exposed or damp positions. No wattage or lumen output is published for it either, and nothing is said about dimming, so if brightness or a dimmer matters to your room, ask us before you order rather than assume. Installation is mains work and a job for a competent electrician.
Specification
| Type |
Surface mounted round bulkhead |
| Light source |
Integrated LED |
| Wattage |
Not stated by the manufacturer |
| Brightness |
Not stated by the manufacturer |
| Colour temperature |
CCT adjustable, three selectable settings; the values are not stated by the manufacturer |
| Size |
Not stated by the manufacturer |
| Finish |
White |
| IP rating |
Not stated by the manufacturer |
| Dimmable |
Not stated by the manufacturer |
| Sold as |
1 fitting |
| Minimum order |
1, sold in multiples of 1 |
Frequently Asked
How does a three CCT fitting work?
One unit gives a choice of three white tones, so you can match it to the other lighting in the room. The manufacturer does not print the three Kelvin values, so check the fitting's own instructions before setting it.
Is there a bulb to buy or replace?
No. The LED is integral to the fitting, so there is no cap to match and no lamp to order alongside it; the unit is replaced as a whole at the end of its life.
What IP rating does it carry?
The manufacturer states no IP rating for this fitting. We treat an unrated fitting as suitable for dry indoor positions only, so keep it away from damp or exposed locations.
How bright is it, and what does it draw?
No lumen output or wattage figure is published for this unit, so we quote neither. If brightness matters to the room, ask us and we will check with the manufacturer before you order.
How many do I get, and can I buy just one?
One fitting per unit, and a single one is all you need to order; there is no pack multiple to buy into and no minimum quantity beyond one.