Description
The Bubble wall light pairs two opal glass globes with a slim reading light, all set on a tall gold backplate with rounded ends. The globes take two G9 lamps between them, each up to 60mm long, and the opal glass diffusers soften their light into an even glow across the wall. Below them, a cylindrical spot holds an integrated LED, so the reading light needs no bulb. It gives 250 lumens from 2.7W at 3000K, a warm white, with a CRI of 90 or more and a 45° beam, so print and colours look natural. The fitting stands 38cm tall and projects 10.5cm from the wall, and each opal glass globe shade is 8cm across.
With its own reading light, this is a natural choice beside a bed. The globes give a soft background glow, and the spot angles a focused pool of light onto a book. It suits a reading chair in a living room just as well. It also works in a hallway, where the slim backplate and 10.5cm projection keep it neat against the wall. It is rated IP20, so it belongs in dry rooms. The modern lines and gold finish sit happily in a contemporary bedroom or alongside warmer, more traditional furnishings.
The structure is iron in a gold finish, with opal glass diffusers over the lamps, a simple pairing that keeps the look light and clean. It runs on 220-240V mains, and as a mains fitting it is for a qualified electrician to install. It carries a 3 year guarantee. For a styling note, hang a pair either side of a headboard. The globes frame the bed evenly, and each side gets its own reading light.
Specification
| Finish |
Gold |
| Materials |
Iron structure, with opal glass diffuser |
| Height |
38cm |
| Projection |
10.5cm |
| Shade Diameter |
8cm |
| Light Source |
Integrated LED and 2 x G9 |
| Lamp Cap |
G9 |
| Number of Lamps |
2 |
| Lamps Included |
No |
| Maximum Lamp Length |
60mm |
| LED Power |
2.7W |
| LED Light Output |
250 lumens |
| LED Colour Temperature |
3000K |
| LED CRI |
≥ 90 |
| LED Beam Angle |
45° |
| IP Rating |
IP20 |
| Voltage |
220-240V |
| Guarantee |
3 years |
| Product Code |
10577 |
Downloads
Assembly Instructions (PDF)
Frequently Asked
How many lamps does the Bubble wall light take?
It takes two G9 lamps, one for each opal glass globe, up to 60mm long. The reading light runs on its own integrated LED.
Does the reading light need a bulb?
No. The reading light has an integrated LED. It gives 250 lumens from 2.7W in a warm white 3000K, with a focused 45° beam.
How big is the Bubble wall light?
It stands 38cm tall and projects 10.5cm from the wall. Each opal glass globe shade is 8cm across, so it sits slim and close beside a bed.
Can I use it in a bathroom?
No. It is rated IP20, so it is for dry rooms only, such as bedrooms, living rooms and hallways.
What is it made of?
The structure is iron in a gold finish. The two globes are opal glass diffusers that soften the light from the G9 lamps into an even glow.
Does it carry a guarantee?
Yes, it carries a 3 year guarantee. As a mains fitting running on 220-240V, it is for a qualified electrician to install.