Description
The Brillix is an anthracite grey LED wall light with an integrated PIR motion sensor built into a rectangular metal housing. The 9.5W integrated LED delivers 3000K warm white light through a polycarbonate diffuser panel set into the top section of the fitting, casting downward and outward illumination when the sensor detects movement. The sensor lens sits in the lower half of the front face, monitoring a detection zone in front of the wall.
Designed for installation above front doors, garage entrances, rear doors and along garden pathways, the Brillix provides automatic security lighting triggered by approach. The IP54 rating protects the LED module and sensor electronics from dust ingress and water splashes from any direction, making the fitting suitable for wall mounting under eaves or on fully exposed exterior walls. The 100mm height and 164mm projection suit standard residential brickwork with a back box depth of 25mm minimum.
The anthracite grey powder-coated metal housing resists UV degradation and corrosion in coastal or high-humidity environments. The polycarbonate diffuser sits flush with the metal frame, preventing dirt and insect build-up around the lens edge. The PIR sensor typically detects movement within a 120-degree horizontal arc up to 8-10 metres from the wall, with sensitivity and duration adjustable during installation via controls on the rear of the fitting.
Ideal Lux manufactures the Brillix in Italy and backs it with a 5-year warranty covering the LED module, driver and sensor electronics. The fixed 3000K colour temperature matches incandescent porch lighting and pairs comfortably with traditional and contemporary facades without the blue cast of higher-temperature LEDs.
Specification
| Length (mm) |
100 |
| Projection (mm) |
164 |
| Dimmable |
No |
| Number Of Bulbs |
1 |
| Bulb Type |
LED |
| Colour Temperature |
3000K |
| IP Rating |
IP54 |
| Warranty |
5 Years |
Frequently Asked
What does IP54 mean for outdoor use?
IP54 means the fitting is protected against dust ingress (not fully dust-tight but sufficient for outdoor use) and against water splashes from any direction. The Brillix can be mounted on fully exposed walls or under eaves, but should not be installed where it will be subjected to direct high-pressure water jets or submersion.
Can the motion sensor sensitivity be adjusted?
Yes. The PIR sensor typically includes adjustment controls on the rear of the fitting, allowing the installer to set detection range, sensitivity and light duration. Consult the installation manual for the specific settings available on this model.
What's the typical detection range?
PIR sensors on fittings of this style typically detect movement within a 120-degree horizontal arc up to 8-10 metres from the wall. The exact range depends on the sensor settings, mounting height and ambient temperature.
Is the LED replaceable?
No. The 9.5W LED module is integrated into the fitting and not user-replaceable. The LED is rated for 25,000-30,000 hours of operation and is covered by Ideal Lux's 5-year warranty.