Description
The Asure is a 100cm LED linear suspension built around a sculpted stainless steel ribbon frame finished in bright gold, with a continuous opal silicone diffuser running along the underside. The integrated 48W LED produces 3000K warm white light through the opal diffuser, casting ambient light downward while the curved gold form reflects highlights back into the room. The ribbon shape flows in three gentle arcs across the 1m width, giving the fitting a sense of movement when viewed from the side.
Designed for kitchen islands, dining tables of 1.8-2.4m length, and open-plan living areas where the fitting is visible from multiple angles, the Asure works best where ceiling height allows 700-900mm clearance between the base of the light and the table or worktop surface. The suspension cables adjust from 40cm minimum to 125cm maximum drop, allowing installation in rooms with ceiling heights from 2.4m to 3.5m. The IP20 rating limits the fitting to dry indoor use only.
The gold finish is a bright, reflective gloss rather than brushed or satin, so the fitting reads as a warm metallic accent under both natural and artificial light. The 3.6kg weight requires secure ceiling fixing — the fitting ships with gravity toggles for plasterboard ceilings. The integrated LED driver supports both 0-10V and TRIAC dimming protocols, giving compatibility with most UK dimmer switches and lighting control systems when wired by a qualified electrician.
Specification
| Width |
100cm |
| Height |
24cm |
| Depth |
24cm |
| Minimum Height |
40cm |
| Maximum Height |
125cm |
| Weight |
3.6kg |
| Energy Class |
F |
| IP |
IP20 |
| Electric Class |
Class 1 |
| Power |
48W |
| Voltage |
180/240V |
| Frequency |
50/60Hz |
| Lumen |
4.46lm |
| Colour Temperature |
3000K |
| CRI |
>84 |
| Finish |
Gold Gloss, Opal |
Downloads
Product Specification Sheet
Assembly Instruction
Frequently Asked
Is the Asure dimmable?
Yes. The integrated LED driver supports both 0-10V and TRIAC dimming protocols. This gives compatibility with most UK dimmer switches and lighting control systems when wired by a qualified electrician.
What table length does it suit?
The 100cm width works best over dining tables of 1.8-2.4m length or kitchen islands of similar size. The fitting should be centred over the table with 700-900mm clearance between the base of the light and the table surface.
What ceiling height is required?
The suspension cables adjust from 40cm to 125cm drop. For a typical 750mm clearance above a table or island, ceiling heights from 2.4m to 3.5m are suitable. Lower ceilings may require shortening the cables during installation.
How is the fitting installed?
The Asure weighs 3.6kg and requires secure ceiling fixing. Gravity toggles are included for plasterboard ceilings. The LED driver and Class 1 earthing must be wired by a qualified electrician, and a suitable ceiling rose or junction box is needed at the fixing point.