Free Delivery on all orders over £99*

10AX Fan Isolator Switch - Pearl Flat Plate

£1099
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge 10AX fan isolator switch provides triple-pole isolation for bathroom extractor fans, utility room ventilation and other fan units where separate switching from the lighting circuit is required. The switch cuts power to the fan independently while leaving the lighting circuit active, allowing the fan to be serviced or replaced without affecting the room lights.

Designed for bathrooms, en-suites, utility rooms and kitchens, the switch mounts in a standard single-gang back box with a minimum depth of 16mm. The ultra-flat plate projects just 2.5mm from the wall once fitted, making it suitable for tight spaces behind furniture or where a low-profile finish is preferred. The switch is rated at 10A on 230V circuits, handling standard residential extractor fan loads.

The pearl finish is a soft off-white metallic tone with a subtle sheen, sitting between pure white and brushed steel in appearance. The premium-grade steel construction includes a matching metal rocker and an integrated gasket that sits between the plate and the wall, reducing dust ingress. The switch carries EN 60669-1 and EN 60669-2-4 certification and is backed by a 25-year manufacturer warranty.

Specification
Height 87.5 mm
Width 87.5 mm
Projection 2.5 mm
Min. Mounting Box Depth 16mm
Construction Premium grade steel
Finish Pearl
IP Rating IP20
Primary Voltage 230V 50Hz
Earth Terminal Yes
Warranty 25
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

What is a triple-pole fan isolator?

A triple-pole isolator switches all three circuit lines (live, neutral, and the switched live to the fan) simultaneously, providing complete isolation from the mains when in the off position. This allows fan units to be serviced or replaced safely without turning off the lighting circuit or the consumer unit.

What back box depth is required?

A minimum 16mm back box depth is required. The flat plate design needs less depth than standard switches, making it suitable for shallow wall cavities or where plasterboard depth is limited.

Can this be used in a bathroom?

Yes. The switch carries an IP20 rating and is designed for typical bathroom installation outside zones 0, 1 and 2 (i.e. not within reach of a shower or bath). It is commonly fitted at ceiling height or on a wall adjacent to the bathroom door to control extractor fans.

What other finishes are available in the Flat Plate range?

Knightsbridge produces the ultra-flat plate range in multiple finishes including polished chrome, brushed chrome, matt black, white and pearl. Use the search function or filters to find other variants in stock at Niori.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Installation

Fits standard UK back boxes

Designed to fit standard UK back boxes for a straightforward swap of your existing fittings.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge 10AX fan isolator switch provides triple-pole isolation for bathroom extractor fans, utility room ventilation and other fan units where separate switching from the lighting circuit is required. The switch cuts power to the fan independently while leaving the lighting circuit active, allowing the fan to be serviced or replaced without affecting the room lights.

    Designed for bathrooms, en-suites, utility rooms and kitchens, the switch mounts in a standard single-gang back box with a minimum depth of 16mm. The ultra-flat plate projects just 2.5mm from the wall once fitted, making it suitable for tight spaces behind furniture or where a low-profile finish is preferred. The switch is rated at 10A on 230V circuits, handling standard residential extractor fan loads.

    The pearl finish is a soft off-white metallic tone with a subtle sheen, sitting between pure white and brushed steel in appearance. The premium-grade steel construction includes a matching metal rocker and an integrated gasket that sits between the plate and the wall, reducing dust ingress. The switch carries EN 60669-1 and EN 60669-2-4 certification and is backed by a 25-year manufacturer warranty.

    Specification
    Height 87.5 mm
    Width 87.5 mm
    Projection 2.5 mm
    Min. Mounting Box Depth 16mm
    Construction Premium grade steel
    Finish Pearl
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Earth Terminal Yes
    Warranty 25
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    What is a triple-pole fan isolator?

    A triple-pole isolator switches all three circuit lines (live, neutral, and the switched live to the fan) simultaneously, providing complete isolation from the mains when in the off position. This allows fan units to be serviced or replaced safely without turning off the lighting circuit or the consumer unit.

    What back box depth is required?

    A minimum 16mm back box depth is required. The flat plate design needs less depth than standard switches, making it suitable for shallow wall cavities or where plasterboard depth is limited.

    Can this be used in a bathroom?

    Yes. The switch carries an IP20 rating and is designed for typical bathroom installation outside zones 0, 1 and 2 (i.e. not within reach of a shower or bath). It is commonly fitted at ceiling height or on a wall adjacent to the bathroom door to control extractor fans.

    What other finishes are available in the Flat Plate range?

    Knightsbridge produces the ultra-flat plate range in multiple finishes including polished chrome, brushed chrome, matt black, white and pearl. Use the search function or filters to find other variants in stock at Niori.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.