Free Delivery on all orders over £99*

10AX 4 Gang 2 Way Plate Switch - Brushed Chrome Square Edge

£1799
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge 10AX 4-gang 2-way plate switch provides four independent rocker switches on a single brushed chrome faceplate, each rated at 10A and wired for 2-way control. The square-edge metal plate measures 149.3mm wide by 89mm high, with a 10.5mm projection from the wall once fitted to a standard 16mm minimum back box.

Designed for multi-zone lighting control in hallways, open-plan living spaces, and commercial premises, the 2-way wiring allows each circuit to be controlled from two separate switch locations. This configuration suits stairs, long corridors, and larger rooms where lighting needs to be switched at entry and exit points. The 10AX rating handles lighting loads up to 2,300W per gang on 230V supply, sufficient for multiple LED downlights or halogen circuits.

The brushed chrome finish provides a directional grain that reduces fingerprint visibility and pairs with both warm and cool-toned interiors. The premium-grade steel construction includes a built-in gasket that provides basic dust ingress protection behind the plate, though the IP20 rating limits use to dry indoor environments only. The plate fixes to the back box with visible screws at either end of the faceplate.

Specification
Height 89 mm
Width 149.3 mm
Projection 10.5 mm
Min. Mounting Box Depth 16mm
Construction Premium grade steel
Finish Brushed Chrome
IP Rating IP20
Primary Voltage 230V 50Hz
Earth Terminal Yes
Terminal Screw
Warranty 25
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

What does 2-way mean?

2-way wiring allows each lighting circuit to be controlled from two separate switch locations. This requires a matching 2-way switch at the other end of the circuit, or an intermediate switch if controlling from three or more positions.

What back box depth is required?

A minimum 16mm back box depth is needed. This shallow requirement suits stud walls and plasterboard installations where deeper boxes would protrude through the rear of the wall.

Can it be used in bathrooms?

The IP20 rating limits this switch to dry indoor environments only. It is not suitable for bathroom zones where splash protection is required.

What load can each gang handle?

Each gang is rated at 10A on 230V supply, handling up to 2,300W per circuit. This suits typical domestic lighting loads including multiple LED downlights, halogen lamps, or standard ceiling fittings.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge 10AX 4-gang 2-way plate switch provides four independent rocker switches on a single brushed chrome faceplate, each rated at 10A and wired for 2-way control. The square-edge metal plate measures 149.3mm wide by 89mm high, with a 10.5mm projection from the wall once fitted to a standard 16mm minimum back box.

    Designed for multi-zone lighting control in hallways, open-plan living spaces, and commercial premises, the 2-way wiring allows each circuit to be controlled from two separate switch locations. This configuration suits stairs, long corridors, and larger rooms where lighting needs to be switched at entry and exit points. The 10AX rating handles lighting loads up to 2,300W per gang on 230V supply, sufficient for multiple LED downlights or halogen circuits.

    The brushed chrome finish provides a directional grain that reduces fingerprint visibility and pairs with both warm and cool-toned interiors. The premium-grade steel construction includes a built-in gasket that provides basic dust ingress protection behind the plate, though the IP20 rating limits use to dry indoor environments only. The plate fixes to the back box with visible screws at either end of the faceplate.

    Specification
    Height 89 mm
    Width 149.3 mm
    Projection 10.5 mm
    Min. Mounting Box Depth 16mm
    Construction Premium grade steel
    Finish Brushed Chrome
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Earth Terminal Yes
    Terminal Screw
    Warranty 25
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    What does 2-way mean?

    2-way wiring allows each lighting circuit to be controlled from two separate switch locations. This requires a matching 2-way switch at the other end of the circuit, or an intermediate switch if controlling from three or more positions.

    What back box depth is required?

    A minimum 16mm back box depth is needed. This shallow requirement suits stud walls and plasterboard installations where deeper boxes would protrude through the rear of the wall.

    Can it be used in bathrooms?

    The IP20 rating limits this switch to dry indoor environments only. It is not suitable for bathroom zones where splash protection is required.

    What load can each gang handle?

    Each gang is rated at 10A on 230V supply, handling up to 2,300W per circuit. This suits typical domestic lighting loads including multiple LED downlights, halogen lamps, or standard ceiling fittings.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.