Free Delivery on all orders over £99*

100mm Extractor Fan Vent With Flyscreen - Black

£599
The RRP is the manufacturer's recommended retail price of the item.
210 In Stock - Ready to Ship
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This 100mm extractor fan vent is a black polycarbonate grille with seven louvered slats and an integral flyscreen, designed to terminate 4-inch round ducting where it exits through an internal or external wall. The louvered slats allow air to pass through whilst directing airflow downward and preventing rain ingress when fitted externally.

Designed for residential bathroom, kitchen and utility room ventilation, the vent fits a 100mm circular cutout in masonry, plasterboard or timber-framed walls. The front grille is removable via four corner screws, allowing the flyscreen mesh to be cleaned or replaced without disturbing the ducting connection. The 48mm recessed depth accommodates the duct spigot connection behind the wall surface, whilst the 152mm square faceplate sits flush against the wall with a 16mm projection from surface to outer edge of the louvres.

The polycarbonate construction resists UV degradation when fitted externally and tolerates temperature variation without cracking. The black finish suits dark render, brick or cladding where a white vent would stand out. The flyscreen mesh behind the louvres prevents insect ingress into the ductwork whilst maintaining adequate airflow for typical 4-inch bathroom or kitchen extraction fans rated up to 100m³/h.

Specification
Height 152 mm
Width 152 mm
Projection 16 mm
Recessed Depth 48 mm
Cut-out Diameter 100 mm
Construction Polycarbonate
Finish Black
Warranty 1
Downloads

Product Specification Sheet

Frequently Asked

What diameter hole is needed in the wall?

A 100mm circular cutout is required. The vent then recesses 48mm into the wall, with the 152mm square faceplate sitting flush against the external or internal wall surface.

Is it suitable for external walls?

Yes. The louvered slats are angled to direct airflow downward and prevent rain ingress. The polycarbonate construction resists UV degradation and temperature variation when fitted externally.

Can the flyscreen be cleaned?

Yes. The front grille is removable via four corner screws, allowing access to the flyscreen mesh for cleaning or replacement without disturbing the ducting connection behind the wall.

What ducting does it accept?

The vent accepts standard 100mm (4-inch) round rigid or flexible ducting. The 48mm recessed depth accommodates the duct spigot connection.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This 100mm extractor fan vent is a black polycarbonate grille with seven louvered slats and an integral flyscreen, designed to terminate 4-inch round ducting where it exits through an internal or external wall. The louvered slats allow air to pass through whilst directing airflow downward and preventing rain ingress when fitted externally.

    Designed for residential bathroom, kitchen and utility room ventilation, the vent fits a 100mm circular cutout in masonry, plasterboard or timber-framed walls. The front grille is removable via four corner screws, allowing the flyscreen mesh to be cleaned or replaced without disturbing the ducting connection. The 48mm recessed depth accommodates the duct spigot connection behind the wall surface, whilst the 152mm square faceplate sits flush against the wall with a 16mm projection from surface to outer edge of the louvres.

    The polycarbonate construction resists UV degradation when fitted externally and tolerates temperature variation without cracking. The black finish suits dark render, brick or cladding where a white vent would stand out. The flyscreen mesh behind the louvres prevents insect ingress into the ductwork whilst maintaining adequate airflow for typical 4-inch bathroom or kitchen extraction fans rated up to 100m³/h.

    Specification
    Height 152 mm
    Width 152 mm
    Projection 16 mm
    Recessed Depth 48 mm
    Cut-out Diameter 100 mm
    Construction Polycarbonate
    Finish Black
    Warranty 1
    Downloads

    Product Specification Sheet

    Frequently Asked

    What diameter hole is needed in the wall?

    A 100mm circular cutout is required. The vent then recesses 48mm into the wall, with the 152mm square faceplate sitting flush against the external or internal wall surface.

    Is it suitable for external walls?

    Yes. The louvered slats are angled to direct airflow downward and prevent rain ingress. The polycarbonate construction resists UV degradation and temperature variation when fitted externally.

    Can the flyscreen be cleaned?

    Yes. The front grille is removable via four corner screws, allowing access to the flyscreen mesh for cleaning or replacement without disturbing the ducting connection behind the wall.

    What ducting does it accept?

    The vent accepts standard 100mm (4-inch) round rigid or flexible ducting. The 48mm recessed depth accommodates the duct spigot connection.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.