Free Delivery on all orders over £99*

Valmere LED Linear Alabaster Wall Light - Soft White & Brass

£43999
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Trade Discount Available
Description

The Valmere is a 400mm linear wall light built around a slim rectangular panel of natural Spanish alabaster, held within a solid copper frame finished in soft white with brass end caps. An integrated 10W LED behind the stone produces a warm 3000K glow, using the alabaster itself as the diffuser so the light source is hidden and only the lit stone is visible from the room.

The vertical 400mm x 85mm format with a 110mm projection suits hallway walls, bathroom flanks beside a mirror, bedhead positions, and stairwell runs. Installed singly the Valmere reads as a quiet vertical accent; installed in pairs either side of a mirror, doorway or panelled section it frames the architecture and adds symmetry. The slim 85mm width keeps the fitting close to the wall in tighter corridors and stairwells where deeper sconces would be obstructive.

Each alabaster panel is cut from natural Spanish stone, so the veining, cloudy patches and tonal shifts vary between pieces and only become fully visible once the LED is switched on. The soft white painted copper body sits flush against the stone and the brass end caps give a defined top and bottom edge to the vertical form. Hard-wired on 230V mains with an integrated LED, there are no bulbs to change and no visible lamp through the alabaster.

Specification
Material Solid Copper & Natural Spanish Alabaster
Finish Soft White & Brass
Height 400mm
Width 85mm
Projection 110mm
Lamp Socket Integrated LED
Colour Temperature 3000K
Voltage 230V
Wattage 10W
Weight -
Warranty 2 Year
Frequently Asked

Does it come with a bulb?

The Valmere has an integrated 10W LED rated at 3000K, so no separate bulb is needed and none can be replaced. The LED runs on 230V mains via standard hard-wired installation.

Is it suitable for a bathroom?

The Specification tab does not list an IP rating for this fitting. Without a confirmed IP rating it should be treated as suitable for general indoor use only. Please contact us before installing in a bathroom zone if a wet-rated fitting is required.

Will the alabaster look the same as the photo?

The overall shape, dimensions and colour temperature will match, but the veining pattern and tonal variation in the stone differ between individual pieces. The natural cloudy patches and mineral lines only become fully visible once the LED is switched on.

How is it installed?

The Valmere is a hard-wired wall light running on 230V mains. It should be fitted by a qualified electrician to a standard wall back box. The 110mm projection and 85mm width keep it close to the wall, suiting narrower hallways and stairwells.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Our materials

Natural Spanish alabaster

Each piece is carved from natural Spanish alabaster, so the veining and tone are unique to your light. No two are the same.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Covered by our warranty.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Valmere is a 400mm linear wall light built around a slim rectangular panel of natural Spanish alabaster, held within a solid copper frame finished in soft white with brass end caps. An integrated 10W LED behind the stone produces a warm 3000K glow, using the alabaster itself as the diffuser so the light source is hidden and only the lit stone is visible from the room.

    The vertical 400mm x 85mm format with a 110mm projection suits hallway walls, bathroom flanks beside a mirror, bedhead positions, and stairwell runs. Installed singly the Valmere reads as a quiet vertical accent; installed in pairs either side of a mirror, doorway or panelled section it frames the architecture and adds symmetry. The slim 85mm width keeps the fitting close to the wall in tighter corridors and stairwells where deeper sconces would be obstructive.

    Each alabaster panel is cut from natural Spanish stone, so the veining, cloudy patches and tonal shifts vary between pieces and only become fully visible once the LED is switched on. The soft white painted copper body sits flush against the stone and the brass end caps give a defined top and bottom edge to the vertical form. Hard-wired on 230V mains with an integrated LED, there are no bulbs to change and no visible lamp through the alabaster.

    Specification
    Material Solid Copper & Natural Spanish Alabaster
    Finish Soft White & Brass
    Height 400mm
    Width 85mm
    Projection 110mm
    Lamp Socket Integrated LED
    Colour Temperature 3000K
    Voltage 230V
    Wattage 10W
    Weight -
    Warranty 2 Year
    Frequently Asked

    Does it come with a bulb?

    The Valmere has an integrated 10W LED rated at 3000K, so no separate bulb is needed and none can be replaced. The LED runs on 230V mains via standard hard-wired installation.

    Is it suitable for a bathroom?

    The Specification tab does not list an IP rating for this fitting. Without a confirmed IP rating it should be treated as suitable for general indoor use only. Please contact us before installing in a bathroom zone if a wet-rated fitting is required.

    Will the alabaster look the same as the photo?

    The overall shape, dimensions and colour temperature will match, but the veining pattern and tonal variation in the stone differ between individual pieces. The natural cloudy patches and mineral lines only become fully visible once the LED is switched on.

    How is it installed?

    The Valmere is a hard-wired wall light running on 230V mains. It should be fitted by a qualified electrician to a standard wall back box. The 110mm projection and 85mm width keep it close to the wall, suiting narrower hallways and stairwells.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.