Description
The Toy S is a long, slim LED wall light in a Brushed Titanium finish. It is a clean rectangular bar 57.7cm wide and 9cm tall, with its light coming from a slot along its lower edge. The light source is an integrated LED, so there is never a bulb to buy or change. It has a CRI of 90, which means colours, skin tones and fabrics look true under it. We sell it in two colour temperatures, 2700K for a warmer glow or 3000K for a slightly crisper white, and in two dimming versions: non-dimmable, or phase-cut dimmable.
Its long, low shape suits a wall where you want a wide wash of light rather than a single point. In a living room it works well over a sofa or along a chimney breast. In a bedroom it sits neatly above a bed in place of a pair of lamps. In a dining room it gives a steady, even light along a sideboard or across a wall of pictures. It is rated IP20, so it is for dry rooms indoors only. The 2700K version leans towards the cosy end for evenings, while 3000K keeps things a touch crisper and cooler for rooms used through the day.
Brushed Titanium is a soft grey finish with a fine brushed texture that sits comfortably with warm woods, stone and pale paint. The light runs on 230V mains power and is wired in by an electrician, so plan its position on the wall before the work starts. If you want to set the mood with a dimmer, choose the phase-cut dimmable version and pair it with a compatible phase-cut dimmer. The non-dimmable version simply switches on and off. Settle on the colour temperature and the dimming version that suit the room when you order, and the wall light is ready for your electrician to fit.
Specification
| Finish |
Brushed Titanium |
| Width |
57.7cm |
| Height |
9cm |
| Diameter |
7cm |
| Light Source |
Integrated LED |
| LED Power |
35W |
| Luminous Flux |
2628lm or 2708lm (by version) |
| Colour Temperature |
2700K or 3000K |
| CRI |
90 |
| Dimmable |
By version: phase cut, or non-dimmable |
| Power |
Mains, wired in by an electrician |
| Voltage |
230V |
| IP Rating |
IP20 |
| Lead time |
Made to order, usually delivered in 4 to 8 weeks |
Frequently Asked
Does the Toy S wall light need a bulb?
No. The light source is an integrated LED, so there is no bulb to buy, fit or replace at any point.
Can I dim the Toy S wall light?
That depends on the version you choose. We sell it phase-cut dimmable, for use with a compatible phase-cut dimmer, or non-dimmable, which simply switches on and off.
What colour temperature is the light?
It comes in 2700K, a warm white for relaxed evening rooms, or 3000K, a slightly cooler white. Both versions have a CRI of 90.
Can I put this wall light in a bathroom?
No. It is rated IP20, so it is for dry rooms only, such as a living room, bedroom or dining room.
How big is the Toy S wall light and how is it powered?
It is 57.7cm wide and 9cm tall. It runs on 230V mains power and is wired in by an electrician.
How long will it take to arrive?
It is made to order for you, so it is usually delivered in 4 to 8 weeks.