Description
The Infinity is a small recessed downlight with a fine trim ring that sets a warm, contained pool of light into the ceiling. It is built around an integrated LED behind a die-cast aluminium ring, finished matt black so the aperture reads as a neat dark circle against the plaster rather than a bright rim. At 65mm across it is a compact head, made to run in a line for even coverage or to pick out a single spot below.
The LED is fixed at a warm 3000K and gives a 28 degree beam of about 520 lumens, with a colour rendering above 95, which is high enough that art, paint and skin hold their tone very closely under it. That accuracy and the fairly tight beam make it a good accent head over a picture, a shelf or a table, as well as a general warm downlight for a hallway or a bedroom where the black ring keeps glare and clutter down.
The LED is built in and rated for a long life, so there is no bulb to fit or replace. The ring is fixed rather than tilting, recesses to just 46mm for shallow ceiling voids, and is rated IP20 for dry indoor rooms. It runs from a driver, which we can supply alongside so the fitting arrives ready to wire in.
Specification
| Number of lights |
1 |
| Light source |
Integrated LED, 7W total |
| Luminous flux |
520 lumens |
| Colour temperature |
3000K (warm white) |
| CRI |
Ra > 95 |
| Beam angle |
28 degrees |
| Diameter |
65mm |
| Height |
46mm (recess depth) |
| IP rating |
IP20 |
| Dimmable |
Depends on driver fitted |
| Adjustable |
No, fixed downward |
| Frame / Structure finish |
Matt black die-cast aluminium |
| Materials |
Die-cast aluminium |
Downloads
Datasheet
Assembly Instructions
3D Model
Frequently Asked
What kind of light does the Infinity downlight give?
A warm, accurate downward pool. The integrated LED runs at 3000K over a 28 degree beam, about 520 lumens, with a colour rendering above 95, so colours and skin tones read very true under it.
Does it use a bulb?
No, the LED is built in. There is nothing to fit or replace; the head recesses into the ceiling and wires to a driver, which we can supply alongside.
Does it tilt, and is it dimmable?
The ring is fixed rather than adjustable, so the beam points straight down. Dimming depends on the driver used; run on a compatible dimmable driver the level can be lowered.
How big is it and where does it suit?
The ring is 65mm across and recesses just 46mm, so it fits a shallow ceiling void. Rated IP20, the high colour rendering suits accent light over art or a shelf, or general light in a hallway or bedroom.