Description
The Ego accent is a low linear bar that clips onto the Ego 48V magnetic track, laying a focused strip of integrated-LED light rather than a round spot. The 223mm body sits close to the rail and throws its beam along a surface, so it grazes a textured wall, lifts a run of shelving or draws a line of light beside a display. Lit, it gives a soft directed wash in a warm 2700K tone; off, the slim matt black bar reads as a neat mark on the ceiling line.
Its LED runs at 7W and gives about 630 lumens at a tight 35 degrees, with a colour rendering above 90 so plaster, timber and fabric hold their true tone under the graze. This version dims through a DALI controller, so the level can be set scene by scene across a whole run. Because it lives on a magnetic track, several bars can be spaced along a rail and each aimed at its own stretch of wall, then moved by hand whenever a layout changes.
The body is extruded aluminium in matt black RAL 9005 and the fitting is rated IP20 for dry indoor rooms. The LED is integrated and rated to 50,000 hours, so there is no bulb to fit or replace. It needs the Ego 48V track, a DALI-capable driver and controller, which we can supply alongside.
Specification
| Number of lights |
1 |
| Light source |
Integrated LED, 7W total (50,000h) |
| Luminous flux |
630 lumens |
| Colour temperature |
2700K (warm white) |
| CRI |
Ra > 90 |
| Beam angle |
35 degrees |
| Length |
223mm |
| Height |
43mm |
| Projection |
22mm |
| IP rating |
IP20 |
| Dimmable |
Yes, DALI |
| Voltage |
48V DC (driver required) |
| Mounting |
Ego 48V magnetic track |
| Frame / Structure finish |
Matt black aluminium |
| Materials |
Extruded aluminium |
Downloads
Datasheet
Frequently Asked
What kind of light does the Ego accent give?
A focused linear graze in a warm 2700K tone, colour rendering above 90. The bar throws light along a surface at about 35 degrees rather than as a round spot, so it lifts a textured wall or a run of shelving.
Does it use a bulb?
No, the LED is built in and rated to 50,000 hours, giving about 630 lumens at 7W. There is nothing to fit or replace; the bar clips onto the Ego magnetic track and runs from its 48V supply.
Can it be dimmed?
Yes, this is the DALI version. Paired with a DALI driver and controller it dims smoothly and can be grouped into scenes, so several bars adjust together or in zones.
What does it need to run?
The Ego 48V magnetic track plus a DALI-capable driver and controller, not a mains ceiling point. The bar locks onto the rail and can be slid and re-aimed later, so we can supply the track, feeds and control gear.