Description
The Aureline is an 800mm vertical column wall light cut from a single piece of natural Spanish alabaster, with a slim 80mm width and 80mm projection from the wall. An integrated 10W LED runs the length of the column, casting warm 3000K light through the stone so the alabaster itself becomes the diffuser rather than glass or acrylic.
Designed for hallways, stairwells, bedside walls and bathroom flanking positions, the slim profile keeps the fitting close to the wall surface and works on narrower wall sections where a wider sconce would feel cramped. Mounted in pairs either side of a bed, mirror or doorway, the Aureline acts as ambient and orientation lighting; mounted singly at full height it reads as a vertical accent that draws the eye upward.
Each column is cut from a different section of stone, so the mineral veining and tonal variation differ between individual pieces. When unlit the alabaster reads as a pale, softly figured cream block; once the LED is on, the layered translucency comes forward and warm patches appear where the stone is thinnest. The brass internal frame supports the alabaster panel and contains the driver, keeping the visible exterior as a clean continuous stone surface.
Specification
| Material |
Brass & Natural Spanish Alabaster |
| Finish |
Soft White & Brass |
| Height |
800mm |
| Width |
80mm |
| Projection |
80mm |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
3000K |
| Voltage |
230V |
| Wattage |
10W |
| Weight |
- |
| Warranty |
2 Year |
Frequently Asked
Does each Aureline look the same?
No. Each column is cut from natural Spanish alabaster, so the veining pattern, tonal variation and translucency differ between individual pieces. This is a feature of the natural stone, not a defect, and is most visible once the LED is switched on.
Is the LED replaceable?
The 10W 3000K LED is integrated into the fitting and is not designed to be user-replaceable. The 2-year warranty covers LED failure within the warranty period.
Can it be used in a bathroom?
The Aureline does not have a published IP rating in the supplied specification, so it should be treated as an indoor-only fitting outside bathroom zones unless an electrician confirms suitability for a specific location.
How is the alabaster cleaned?
Wipe gently with a dry, soft microfibre cloth. For more stubborn marks a barely-damp cloth with distilled water is acceptable. Avoid household sprays, polishes and chemical cleaners, as alabaster is porous and softer than marble.