Free Delivery on all orders over £99*
Save 30%

Arcus LED Corner Profile 16 x 18mm White Surface Mounted - 2m

£2199
RRP £3120
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Arcus is a 2m angled aluminium LED corner profile with a 16 x 18mm cross-section, designed for surface-mounting LED strip lighting in corners. The profile holds LED tape at 45° to the wall join, directing light outward into the room rather than onto the corner itself. The white powder-coated aluminium finish provides a clean edge against white ceilings and walls.

Designed for kitchens where wall-to-ceiling joins need indirect accent lighting, living rooms where architectural corners benefit from definition, and retail environments where corner detailing needs to be highlighted without visible LED tape. The profile ships as a single 2m extrusion and can be cut to length on-site with a hacksaw or mitre saw, allowing it to fit exact room dimensions without waste. Surface mounting uses screws or adhesive pads through the back channel, depending on substrate type.

The aluminium construction acts as a heat sink, drawing heat away from the LED strip to extend its operational life and maintain consistent light output. The 16mm projection from the wall means the profile sits close to the corner without protruding into usable space. The frosted polycarbonate diffuser (if supplied with your specific variant) snaps into the front channel to soften the LED dots into a continuous line of light. The white finish allows the profile to blend into white-painted interiors, making the light source appear architectural rather than applied.

Specification
Length (mm) 2000
Projection (mm) 16
Warranty 5 Years
Frequently Asked

What width LED strip does it accept?

The internal channel width suits standard 8-12mm LED strip tape. Check the specific strip profile depth before ordering to ensure it sits within the 18mm height without fouling the diffuser clip.

Can the profile be cut to length?

Yes. The 2m extrusion can be cut to exact room dimensions using a hacksaw or mitre saw. Cut ends should be deburred with fine sandpaper before mounting the diffuser to prevent scratching.

Does it come with a diffuser?

This depends on the specific variant ordered. Some Arcus profiles ship with a frosted polycarbonate diffuser that clips into the front channel; others ship as bare aluminium extrusion with the diffuser sold separately. Check the product listing or contact us to confirm what is included.

How is it mounted?

The rear channel accepts screws or adhesive pads depending on the wall substrate. On plaster or plasterboard, use wall plugs and screws at 300-400mm intervals. On tile or glass, use clear silicone adhesive or double-sided foam tape rated for the profile weight.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Arcus is a 2m angled aluminium LED corner profile with a 16 x 18mm cross-section, designed for surface-mounting LED strip lighting in corners. The profile holds LED tape at 45° to the wall join, directing light outward into the room rather than onto the corner itself. The white powder-coated aluminium finish provides a clean edge against white ceilings and walls.

    Designed for kitchens where wall-to-ceiling joins need indirect accent lighting, living rooms where architectural corners benefit from definition, and retail environments where corner detailing needs to be highlighted without visible LED tape. The profile ships as a single 2m extrusion and can be cut to length on-site with a hacksaw or mitre saw, allowing it to fit exact room dimensions without waste. Surface mounting uses screws or adhesive pads through the back channel, depending on substrate type.

    The aluminium construction acts as a heat sink, drawing heat away from the LED strip to extend its operational life and maintain consistent light output. The 16mm projection from the wall means the profile sits close to the corner without protruding into usable space. The frosted polycarbonate diffuser (if supplied with your specific variant) snaps into the front channel to soften the LED dots into a continuous line of light. The white finish allows the profile to blend into white-painted interiors, making the light source appear architectural rather than applied.

    Specification
    Length (mm) 2000
    Projection (mm) 16
    Warranty 5 Years
    Frequently Asked

    What width LED strip does it accept?

    The internal channel width suits standard 8-12mm LED strip tape. Check the specific strip profile depth before ordering to ensure it sits within the 18mm height without fouling the diffuser clip.

    Can the profile be cut to length?

    Yes. The 2m extrusion can be cut to exact room dimensions using a hacksaw or mitre saw. Cut ends should be deburred with fine sandpaper before mounting the diffuser to prevent scratching.

    Does it come with a diffuser?

    This depends on the specific variant ordered. Some Arcus profiles ship with a frosted polycarbonate diffuser that clips into the front channel; others ship as bare aluminium extrusion with the diffuser sold separately. Check the product listing or contact us to confirm what is included.

    How is it mounted?

    The rear channel accepts screws or adhesive pads depending on the wall substrate. On plaster or plasterboard, use wall plugs and screws at 300-400mm intervals. On tile or glass, use clear silicone adhesive or double-sided foam tape rated for the profile weight.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.