Description
Five E27 lampholders sit on a single round plate that stays tight to the ceiling, finished in plain white so it settles quietly against most ceiling paint. The plate measures 25cm across, with the holders spaced evenly and each ready to take a shade of your choosing. It is a universal frame rather than a finished design: the shades are bought separately, so the same fitting can read formal, plain or playful. We keep it in stock because it answers a room that needs several light sources with no space for a drop.
Low ceilings are where it earns its place. Hallways, landings, small bedrooms and box rooms all suffer under a hanging pendant, and this holds the light close to the ceiling while spreading it across several points rather than a single spot. It suits anyone matching shades to existing fabrics or wallpaper, and it helps where one bright lamp would glare. Dimming is possible with suitable lamps and a compatible dimmer. We would use GLS lamps here in a warm output, keeping within the 20W limit for each holder.
The white finish is smooth and even, and a dry cloth run over the plate is all it usually needs once the lamps have gone cold; a barely damp cloth lifts kitchen film if a fitting sits near a hob. It needs an earthed supply and belongs indoors, in dry rooms. It carries a one year warranty. Shades and lamps are both chosen separately, which is rather the point of it. The range also runs to a smaller white flush fitting, along with polished chrome, satin nickel and antique brass in semi flush fittings and linear pendants.
Specification
| Colour |
White |
| Ceiling Mountable |
Yes |
| Weight |
1.00KG |
| Diameter |
250mm |
| Height |
135mm |
| Materials Used |
Iron |
| Adjustable Height |
No |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
5 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (GLS A60) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Included |
No |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
Are shades included?
No. This is a universal frame designed to take shades of your choosing, so the five shades are bought separately and can be matched to the room.
What lamps does it take?
Five E27 lamps, up to 20W each. LED GLS (A60) lamps are the sensible choice and are not supplied with the fitting.
Can it be dimmed?
Yes, provided you fit dimmable lamps and pair them with a compatible dimmer switch.
How much room does it need below the ceiling?
The fitting itself is 135mm high and 250mm in diameter, before you add the depth of whichever shades you choose.
Is it suitable for a bathroom?
No. It is rated IP20, so keep it to dry rooms such as hallways, bedrooms and living spaces.
How should I clean it?
Switch off at the wall, wait for the lamps to cool, then dust the plate and holders with a soft dry cloth. Avoid sprays and solvents on the white finish.