Description
The Yebra LED downlight is a round recessed ceiling light with a white plastic body and a silver-coloured reflector set deep inside it. This keeps the light source back from view, and the glow falls where it is needed. It measures 8.7cm across, needs a 6.8cm cut-out and takes just 4.4cm of recess depth, so it suits ceilings with only a shallow void. The LED is integrated, drawing 4.8W for 450lm. It carries an IP44 rating, which means it is protected from splashing water and can go where a dry-room downlight cannot.
That rating makes it a sensible choice for a bathroom ceiling, where a qualified electrician will confirm the right zone. It is just as much at home in a kitchen, hallway or landing. The colour temperature is adjustable across three settings: 2700K for a warm white that suits living spaces in the evening, 4000K for a crisper neutral white over a worktop, and 6500K for a bright daylight tone wherever you want clear task light. Because one fitting covers all three, you can give each room the tone that suits it while every ceiling keeps the same clean white trim. It is dimmable too, so the same light can go from bright and busy to calm and low.
The body is white plastic, and the packed weight is just 0.217KG. It runs from a 220-240V, 50/60Hz mains supply. There is no switch on the fitting itself because it is switched at the wall, so your usual light switch does the work. Its energy class is E. As a wired-in mains light, it is installed by a qualified electrician, and the installation instructions are available as a download. Before ordering, measure any existing ceiling holes: the cut-out is 6.8cm, so replacing older downlights is simplest where the holes already match.
Specification
| Diameter |
8.7cm |
| Body Material |
Plastic |
| Body Colour |
White |
| Light Source |
LED, integrated |
| Wattage |
4.8W |
| Lumens |
450lm |
| Colour Temperature |
2700K, 4000K, 6500K |
| Dimmable |
Yes |
| Features |
Adjustable colour temperature |
| Switch |
None (switched at the wall) |
| IP Rating |
IP44 |
| Protection Class |
Class II |
| Voltage |
220-240V, 50/60Hz |
| Energy Class |
E |
| Recess Depth |
4.4cm |
| Cut-Out |
6.8cm |
| Weight (packed) |
0.217KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can the Yebra downlight go in a bathroom?
Yes. It is rated IP44, which means it is protected from splashing water, so it suits a bathroom ceiling. A qualified electrician will confirm the right zone.
What size hole does it need?
It needs a 6.8cm cut-out and 4.4cm of recess depth. The white trim measures 8.7cm across once fitted, so it covers the edge of the hole neatly.
Which colour temperatures are there?
The colour temperature is adjustable across three settings: 2700K warm white, 4000K neutral white and 6500K daylight. All three come from the one fitting.
Is the downlight dimmable?
Yes, it is dimmable, so you can bring the 450lm output down for a softer, calmer light in the evening.
How bright is the LED?
The integrated LED gives 450lm from 4.8W. That is a good level for general ceiling light when several downlights are spaced across a room.
Does it have its own switch?
No, there is no switch on the fitting itself. It is switched at the wall, so your usual wall switch controls it.