Description
Small, upright and softly toned, this pendant has an aged pewter body 10cm across and 23cm tall, hung on a flex you can set at any drop up to 1.5m. It takes an E27 lamp, and the lamp that suits it best depends on the shade you pair it with, so the fitting reads as a neat piece of metalwork rather than the whole story. Aged pewter has a low sheen and a soft grey cast that sits happily against painted plaster and bare timber alike.
We reach for it where a light needs to hang without crowding a room: in a run along a kitchen island, beside a bed in place of a table lamp, over a small dining table, or in a hallway where floor space is tight. The long flex gives room to work in stairwells and tall rooms, while the same fitting can hang short and close in a snug or a galley kitchen. It suits anyone who likes to choose their own shade and swap it later, and the modest body means it will not dominate a narrow space.
The body is finished in aged pewter throughout, a muted metallic tone that warms rather than glares under a soft lamp. Keep the upkeep light: a dry duster over the body when you clean the room, and nothing abrasive or chemical, so the surface stays even. It carries a one year warranty. We stock the same E27 pendant in antique brass, antique copper and black chrome, and there is a G9 version of Wick in a wider spread of finishes including satin black, polished nickel and satin white, so a group over a worktop can be matched or mixed on purpose. Lamps are not included.
Specification
| Colour |
Aged Pewter |
| Weight |
0.54KG |
| Diameter |
100mm |
| Minimum Drop (mm) |
260mm |
| Maximum Drop (mm) |
1500mm |
| Body Height (mm) |
230mm |
| Materials Used |
Iron |
| Adjustable Height |
Yes |
| Hanging Method |
Cable |
| Energy Class |
A++ to A |
| Max Energy Class |
A++ |
| Min Energy Class |
A |
| Lamp |
1 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED Lamp Dependant On Shade |
| Light Distribution |
Ambient |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Cup Dimensions (mm) |
D:50mm H:185mm |
| Bracket Dimensions (mm) |
L:95mm W:20mm H:15mm |
| Cable Information |
2x 0.75mm Double Insulated Round PVC Cable x L:1550mm |
| Shade Included |
No |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What lamp does it take, and how powerful can it be?
It uses a single E27 lamp of up to 20W. An LED is the sensible choice, and the type you pick will depend on the shade you fit over it.
How short can the pendant hang?
The drop can be set anywhere between 260mm and 1500mm, so it works over a low table or from a high ceiling.
Can it be dimmed?
Yes, with a dimmable lamp and a compatible dimmer. Neither is supplied with the pendant.
Is it suitable for a bathroom?
No. It is rated IP20, which means dry rooms only, so keep it to kitchens, bedrooms, hallways and living spaces.
How heavy is the fitting?
It weighs 0.54kg, which keeps it easy to handle and light on the flex.
Does it come with a shade?
No, the pendant is supplied as the metalwork and flex, ready for a shade of your choosing.