Description
The Villanova 1 Track Adapter is the small connector that lets a light hang from a single-circuit lighting track, so you can place a pendant exactly where it is wanted along the run. It is made of white plastic, 8cm long, 2cm wide and 0.5cm high, and weighs only 0.03KG, with a grey grip on its underside that holds the light in place. There is no lamp socket on the adapter itself, so the lamp comes from the light you attach. It runs at 220-240V, 50/60Hz, and at IP20 it belongs indoors, in dry rooms.
Use it in a kitchen, a dining room, a living room or a hallway where a track already runs across the ceiling. It suits anyone who wants a hanging light over a dining table or a kitchen island without adding a new ceiling point, and because the adapter sits on the track rather than in the ceiling, the light can move along it later if the furniture changes. Being so compact, it keeps the eye on the light rather than the connector.
The white finish blends quietly with a white track and a white ceiling. The adapter has no switch of its own, so the light it carries is switched at the wall. The installation instructions come as a download, and as a mains part it is fitted by a qualified electrician. Before ordering, check that your track is a single-circuit one, as this adapter is made for that type of track.
Specification
| Material |
Plastic |
| Colour |
White |
| IP Rating |
IP20 |
| Light Source |
without lamp socket |
| Length |
8cm |
| Width |
2cm |
| Height |
0.5cm |
| Weight |
0.03KG |
| Protection Class |
Class I |
| Voltage |
220-240V, 50/60Hz |
| Operating Voltage |
220-240V, 50/60Hz |
| Switch |
None (switched at the wall) |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can the track adapter go in a bathroom?
No. It is rated IP20, which means it belongs indoors in dry rooms only, so we keep it away from bathrooms, damp spaces and anywhere outdoors.
Does the adapter include a lamp holder?
No. It has no lamp socket of its own, so the lamp comes from the pendant or light you hang from the adapter.
How big is the track adapter?
It is 8cm long, 2cm wide and 0.5cm high, and it weighs just 0.03KG, so it stays discreet on the track.
Which voltage does the adapter use?
It runs at 220-240V, 50/60Hz, and it has no switch of its own, so the light it carries is switched at the wall.
Which type of track does it suit?
It is a single-circuit adapter, so it is made for a single-circuit lighting track. We suggest checking your track type before ordering.
What material is the adapter?
The body is white plastic, with a grey grip on its underside that holds the light you hang from the track.