Description
The Vera Large is a 600mm vertical wall light cut from a single block of natural Spanish alabaster, with a sculpted inward contour at its midpoint that breaks the otherwise linear column into two soft, opposing curves. An integrated 9W LED runs concealed inside the stone and lights it from within, turning the alabaster itself into the diffuser at a warm 3000K colour temperature.
Sized at 600mm high, 65mm wide and 80mm in projection, the Vera suits hallways, stairwells, bedside walls and bathroom-adjacent corridors where a tall, slim profile reads better than a round wall light. It works as a single feature beside a doorway or mirror, or installed in pairs to flank a bed, vanity or fireplace. The 80mm projection keeps the fitting close to the wall, which helps in narrower hallways where deeper fittings catch shoulders.
The alabaster carries natural veining and tonal variation that becomes more visible once the LED is on, with the cloudy, mineralised pattern shifting across the stone face. A brushed brass mounting plate sits behind the alabaster against the wall, introducing a warm metallic accent at the rear of the fitting without competing with the stone. Because each piece is cut from a different section of quarried alabaster, no two Vera lights show identical figuring.
Specification
| Material |
Solid Copper & Natural Spanish Alabaster |
| Finish |
Soft White & Brushed Brass |
| Height |
600mm |
| Width |
65mm |
| Projection |
80mm |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
3000K |
| Voltage |
230V |
| Wattage |
9W |
| Weight |
- |
| Warranty |
2 Year |
Frequently Asked
Does the Vera need a separate bulb?
No. The 9W LED is integrated within the alabaster body and runs directly off 230V mains, so no separate bulb purchase is required. The LED produces a warm 3000K output suited to bedrooms, hallways and living rooms.
Is the Vera dimmable?
Dimmability depends on the specific dimmer used with an integrated LED driver. Please contact us before pairing the Vera with a dimmer so we can confirm compatibility for your installation.
Can it be installed in a bathroom?
The Vera is not supplied with a stated IP rating, so it is intended for general indoor use rather than bathroom zones where moisture ingress is a concern. It works well in hallways adjacent to bathrooms, bedrooms, stairwells and living areas.
Will two units look identical if installed as a pair?
The overall form, dimensions and brass mounting will match, but the alabaster veining and tonal variation differ between pieces because each is cut from a different section of natural stone. Most buyers consider this part of the appeal when fitting Vera in pairs.