Description
Our Track On end cap is a small white plastic piece made to close off the open end of a Track On lighting track. It is 3.9cm wide and 3.4cm high, projects just 0.3cm and weighs 0.02KG, so it sits neatly at the end of the run without drawing attention. It has no lamp socket and gives no light of its own: this is a finishing part, not a light. The IP20 rating settles where it belongs, indoors and dry.
We would fit one at every open end of a Track On run in a living room, hallway, study, bedroom or shop display, anywhere the track is on show. An open track end is the small detail the eye tends to catch; with a cap in place, the whole run looks finished and deliberate. Its white finish sits quietly against a white ceiling, so the cap reads as part of the track rather than an extra piece. It suits anyone fitting a new track who wants the ends as tidy as the lights.
On its face sits a gently recessed rectangular panel framed by a flat border, and small locating pins stand out from its back edge. The plastic body is light and plain, and plastic does not rust, which suits a part that stays in place for years. There are no settings and nothing to switch. As a practical note, count the open ends of your track before you order, and order a cap for each open end.
Specification
| Material |
Plastic |
| Colour |
White |
| IP Rating |
IP20 |
| Light Source |
without lamp socket |
| Length |
3.9cm |
| Width |
3.9cm |
| Height |
3.4cm |
| Projection |
0.3cm |
| Weight |
0.02KG |
| Voltage |
uden |
| Operating Voltage |
uden |
Frequently Asked
What does the Track On end cap do?
It closes off the open end of a Track On lighting track so the run looks finished. It has no lamp socket and gives no light.
Can the end cap go in a bathroom or outdoors?
No. It is rated IP20, which means it belongs indoors in a dry room, never outdoors, in a bathroom or anywhere near water.
How big is the end cap?
It is 3.9cm wide and 3.4cm high, projects just 0.3cm and weighs 0.02KG, so it is a very small, light part.
What material is the end cap?
It is white plastic, with a gently recessed rectangular panel on its face and small locating pins on its back edge.
Does the end cap take a bulb?
No. It has no lamp socket and takes no bulb; it is a plain finishing piece for the end of a Track On track rather than a light.