Tiffany 3 Light Crystal Bar Pendant - Antique Brass with Cream Shades

The Tiffany is a 1m linear bar pendant carrying three pendant lights, each built around a cream fabric shade fitted over an E27 bulb holder with cascading crystal droplets suspended beneath. The three pendants hang at equal intervals from a rectangular antique brass canopy, creating a single coordinated fitting designed to light kitchen islands, dining tables and long worktops.

Each pendant consists of a tapered cream fabric shade paired with a vertical cluster of faceted crystals hanging from the base of the brass lampholder. The crystals catch and refract light from the E27 bulb above, adding reflected sparkle beneath the main downward light cast through the fabric. The antique brass finish on the canopy and lampholders provides a warm metallic tone that pairs with both warm wood and cool grey kitchen surfaces.

The bar measures 1000mm long by 230mm wide, fitting standard kitchen islands between 1200-1800mm in length where three evenly-spaced pendant lights provide balanced illumination without needing separate ceiling roses. The drop adjusts between 630mm and 1500mm on installation, allowing the fitting to be set 700-900mm above a worktop or dining table depending on ceiling height. Each of the three E27 sockets accepts bulbs up to 60W (sold separately), and the fitting is dimmable when paired with dimmable bulbs and a compatible trailing-edge dimmer.

What bulbs does the Tiffany take?

Each of the three pendants takes a standard E27 (Edison screw) bulb up to 60W. Bulbs are sold separately. Most users pair this with warm-white LED bulbs between 6-10W and 2700K-3000K for dining and kitchen task lighting.

Is the Tiffany dimmable?

Yes, when paired with dimmable E27 bulbs and a compatible trailing-edge dimmer. The fitting itself does not restrict dimming — dimmer compatibility depends on the bulbs chosen.

What length kitchen island does it suit?

The 1m bar works well above kitchen islands between 1200-1800mm long. For longer islands or tables, consider using two Tiffany fittings positioned end-to-end with a gap between them, or look at Mantra's longer bar pendants with more lights.

Can the drop height be adjusted after installation?

The drop is set during installation by adjusting the cable length within the canopy. Once installed and the canopy fixed to the ceiling, the drop cannot be changed without re-opening the canopy and re-cutting the cable.