TIBERI PRO 30W Surface Downlight Ø170 115 deg Mains Cool White - Black

The TIBERI PRO is a surface-mounted round downlight that runs 30W direct from 220-240V AC mains, putting out 3000 lumens at a 4000K cool white tone. A wide 115 degree beam spreads the light broadly rather than tightly focusing it, which fills a space evenly instead of pooling. North American buyers will recognise this format as a surface-mount can light, fixed to the ceiling face rather than recessed into a void. The Ra 90 colour rendering keeps tones true, and the round aluminium alloy body measures Ø170 by 113mm.

Because it surface mounts, this fitting suits ceilings with no recess depth above them, including concrete soffits and shallow voids where a recessed can will not fit. At general lighting levels the 3000 lumen output covers around 10 m², making it a sensible single fitting for a hallway, utility room, porch ceiling or a section of a kitchen, with several spaced across a larger room. The IP54 rating means it copes with splashes and sheltered damp, so it works in bathroom zones away from direct spray and in covered outdoor spots such as a porch or carport. Keep it clear of fully exposed positions, direct water jets and submersion, which sit beyond what IP54 protects against.

The body is aluminium alloy in a black finish, with the round profile sitting proud of the ceiling on a surface plate rather than dropping into a cut-out. It carries an IP54 rating for splash resistance and a rated lifespan of 50,000 hours from the integrated LED, so there is no bulb to replace. This version is not dimmable, running at a fixed output, and the cool white 4000K tone is set rather than selectable. The TIBERI PRO range also includes recessed and alternative wattage options if a different mounting or output suits the space better.

Is this downlight recessed or surface mounted?

It is surface mounted, fixing to the face of the ceiling on its round plate rather than dropping into a cut-out hole. This makes it suitable for concrete soffits and shallow ceiling voids where there is no room to recess a fitting. No cut-out is needed for installation.

Can I use it in a bathroom or outdoors?

The IP54 rating means it resists splashes and sheltered damp, so it suits bathroom zones away from direct spray and covered outdoor areas like a porch or carport. It is not rated for fully exposed positions, direct water jets or submersion. Keep it under cover where outdoor use is intended.

How many will I need for a room?

Each fitting puts out 3000 lumens, covering around 10 m² at general lighting levels. A single unit suits a hallway, utility room or small section of a kitchen, while larger rooms benefit from several spaced evenly across the ceiling. The wide 115 degree beam helps the light spread without harsh pooling.

How do I clean and maintain it?

Wipe the black aluminium body and the lit face with a soft dry or slightly damp cloth, avoiding abrasive cleaners that could mark the finish. The LED is integrated and rated for 50,000 hours, so there is no bulb to change over its working life. Make sure power is off before any cleaning.